>It's the High Definition widescreen LCD on this link:
>
>http://www.consumer.philips.com/consumer/catalog/tree/TV_GR_HK_CONSUMER/FLAT_TV_
CA_HK_CONSUMER/product/23PF5320_98_HK_CONSUMER/catalog.jsp?activeTab=specificati
ons&language=en&country=HK&catalogType=CONSUMER&proxybuster=O35NIB4FNNQ5FJ0RMRES
HQNHKFSEKI5P
>
>The cable I have right now is not long enough. I at least need to get a
>longer cable first before I can test out the output.
According to the specs that TV has both VGA and DVI input ports, and
is capable of displaying 1024 x 768 or 1280 x 768 resolution.
It should work just fine as a monitor with either of those display
settings. Note that if you use 1024 x 768 output the display will be
stretched horizontally so that circles will appear as ovals etc.
I recently set up a computer to TV connection in a local Sears store
using a 42 inch LCD TV with similar inputs.
I used a 50 foot high quality male to male VGA cable to connect the TV
to a second video card in the PC on the sales floor and the image
quality is excellent - text is fully readable etc.
Using HD capable TVs is far different than using S-Video inputs on
conventional TV sets.
Good luck
Ron Martell Duncan B.C. Canada

Signature
Microsoft MVP (1997 - 2006)
On-Line Help Computer Service
http://onlinehelp.bc.ca
"Anyone who thinks that they are too small to make a difference
has never been in bed with a mosquito."
> It's the High Definition widescreen LCD on this link:
>
[quoted text clipped - 4 lines]
>
> I'm in Hong Kong.
[]
>>> My TV will accept normal PC to monitor connection. And my monitor
>>> resolution is right now set to 1280x1024. I want to use the TV to watch
>>> some of the widescreen movies on the harddisk.
[]
The link shows that the TV's native resolution is 1366 x 768, so no, it
won't display 1280x1024. The web page also does show what computer
resolutions - and refresh frequencies! - it _will_ take:
Supported Display Resolution
Computer formats : 1024 x 768, 60Hz, 1280 x 768, 60Hz, 640 x 480, 60, 67,
72, 75Hz, 800 x 600, 56, 60, 72, 75Hz
Video Formats : 640 x 480i - 1Fh, 640 x 480p - 2Fh, 720 x 576i - 1Fh, 720 x
576p - 2Fh, 1280 x 720p - 3Fh, 1920 x 1080i - 2Fh
So, basically, you're stuck with the lower ones. 1280x768 is probably the
best bet, if your graphics card can do a widescreen one like that; older
cards might not.
It might not matter that much: it depends where you got the files "on the
hard disk". Unless they're from a source with resolution greater than 768
vertically, then you shouldn't lose anything; the only problem might be if
your video player software won't play them so they look "squashed" (tall and
thin) on your monitor, or the TV/monitor won't stretch such a display out.
(That's assuming you can't get the graphics card to do the widescreen
1280x768 mode; if you can, all is well.)
Looks like a nice set; enjoy!