I re-installed Windows 98 two months ago and the system
was working fine until one week ago. When I tried to turn
on the pc, it did not go thru its normal progressions. In
other words, its was not booting up. It just had a
blinking cursur underneath the text as follows;

Award Modular Bios v4,51pg, an Energy Star Ally
Copyright(c)1984-99, Award Software, Inc.
SBA0908
Intel(R) Celeron(TM)CPU at 533mhz
_ (blinking curser)

So I contacted the makers of my pc and they told me to re-
install Windows 98 again. So I began installing it again,
but now I am stuck on the last step which happens to be
step 4 of 4. (Reloading Windows 98)

Step 4 starts as follows:
1. I have started the computer with the Windows 98 start
up disk and selected BOOT WITH CD ROM SUPPORT.  

MSCDEX VERSION 2.25
Copyright(c)Microsoft corp. 1986-1995. All rights
reserved.
DRIVE E: = Driver MSCD001 UNIT 0

2. I then typed E: and hit enter. Then I typed SETUP and
hit enter to start the setup as the instructions suggest.
Here below is the error that comes up:

E:\>SETUP
Bad command or file name

IT WON'T LET ME GO ANY FURTHER TO COMPLETE THE
INSTALLATION. CAN YOU PLEASE HELP, DO YOU HAVE ANY
SUGGESTIONS?
.