> I have a new hard drive and I keep receiving "operating system not
> found"
So did you put one on it?

Signature
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
In order for a new hard drive to work properly you need to do the following:
1. Install it physically - making sure that the jumpers is set properly.
2. Partition the drive using Fdisk Then the partition need to be set active
if it is to be the boot drive.
You would do this from a floppy. If you already have a drive installed with
the operating system and the new drive is installed as a secondary drive you
can boot the existing drive and do the partitioning and the format.
3. Format the drive
You would also do this from a floppy
4. Install the operating system

Signature
Jon Hildrum
DTS MVP
Jon_Hildrum@msn.com
www.hildrum.com
> I have a new hard drive and I keep receiving "operating system not found"