Defrag

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

JJ - 28 Aug 2004 17:16 GMT

My defrag will start processing, but it goes no where. I
will walk away and come back and it is still on 0%. This
is something that worked fine before, but just presented a
problem one day. Any suggestions to get it working again?

Thanks.

Reply to this Message

Joan Archer - 28 Aug 2004 18:04 GMT

Try doing it in Safe Mode or download this program developed by Koldbear
and
associates.
Joan

Get the free ScanDefrag. It is the most advanced disk maintenance
program there is. It runs Disk Cleanup, ScanDisk, and Disk
Defragmenter. It's easy to setup and use, and it can deal with
problems like "drive's contents have changed: restarting...".
Get it and read about all the options it has that you can use.
http://home.earthlink.net/~bblanton2/scandefrag/main.htm
http://www.blueorbsoft.com/scandefrag/index.html

It is not unusual to see Defrag restart a number of times.
It is , however, unusual to see ScanDisk restart.
This is why I suggest starting it at bedtime and letting it run overnight.
Please, email "The ScanDefrag Team" if you have any problems using our
program. Your problem, will be properly attended to. And we assure you,
that every attempt will be made to resolved it..
To see how to email us, read the ScanDefrag "Readme" file, using
ScanDefrag
under the "Help" menu.

> My defrag will start processing, but it goes no where. I
> will walk away and come back and it is still on 0%. This
> is something that worked fine before, but just presented a
> problem one day. Any suggestions to get it working again?
>
> Thanks.

Reply to this Message

anonymous@discussions.microsoft.com - 31 Aug 2004 14:07 GMT

>-----Original Message-----
>My defrag will start processing, but it goes no where. I
[quoted text clipped - 5 lines]
>.
>"joe in the message above you presented the same problem.

I posted a possible solution there. Check it out and let
us know if it works. Tom

Reply to this Message