The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive.  Follow this procedure and allow
Windows XP to partition and format your drive:

NOTE:  It would be best to physically disconnect all your peripheral hardware
             devices, except the monitor, mouse and keyboard, before installing XP.

1.    Open your BIOS and set your "CD Drive as the first bootable device".

      ===> Accessing Motherboard BIOS
      ===> http://www.michaelstevenstech.com/bios_manufacturer.htm

2.    Insert your Windows XP CD in the CD Drive and reboot your computer.
3.    You'll see a message to boot to the CD....follow the instructions.
4.    The setup menu will appear and you should elect to delete the existing
      Windows partitions, then create a new partition, then format the primary
      partition (preferably NTFS) and proceed to install Windows XP.

5.    Clean Install Windows XP
       http://michaelstevenstech.com/cleanxpinstall.html

       [Courtesy of  Michael Stevens, MS-MVP]

6.    ==> Immediately after installing Windows XP, turn on XP's Firewall.
      ==> http://www.microsoft.com/security/protect/

7.    After Windows XP is installed, visit the Windows Update website
       and download the available "Critical Updates".

8.    After installing the critical updates, be sure and visit the support website
      of the manufacturer of the computer to download and install any
      available Windows XP compatible drivers, such as video adapter
      and audio drivers.

9.    If you happen to run into any installation difficulties, use the following resources:

      How to Troubleshoot Windows XP Problems During Installation
      http://support.microsoft.com/default.aspx?scid=kb;EN-US;310064

      Troubleshooting Windows XP Setup
      http://www.kellys-korner-xp.com/xp_setup.htm

      [Courtesy of MS-MVP Kelly Theriot]