I would like to set up routing for my virtual pc's. How do I do this?
Thx. in adv.
-NET

I have a guest VPC 98SE and host XP (laptop).  The
wireless networking works just fine at work with a Netgear
AP and also at home with a Netgear MR314 Wireless Router
(using the onboard wireless NIC - laptop also has onboard

I was running Windows 2003 RIS on a VPC Guest with XP as host.  When I open
up another VPC Guest it receives the conformation from RIS server.  However,
on another computer, the VPC guest can not receive a RIS broadcast - I am
connected via crossover.  I can ping from other machine ...

I've installed RHEL 2.1 and 3.0 on VPC with great success. However,
for performance reasons, I need to disable the autonegotiate feature
in the default intel/dec 21140 NIC. I've disabled it on the host NIC
driver (my host OS is Win2k), but I can't get any Linux tool (ethtool,

When creating a Virtual PC Console, Windows 2003 Server is
an option. However, I have read on this newsgroup that
Windows Server 2003 on Virtual PC isn't supported.
I'm running XP Pro on my desktop and want to create a W2K3

You might be interested to know that one of the programs
we develop has a different aspect under VPC. The program
is developed under Delphi and the basic procedure goes
like this. You can load our program and the mainscreen is

I recently upgraded from Connectix to Microsoft VPC. (this is good because
networking is better)
My main reason for use is to run a virtual Win98 to run my old Agfa scanner,
which has no drivers for XP

i installed the virtual pc o my pc, then i tryed to install mandrake 10.0
but it doesnt work,
- the system installation start
- tell me to press enter to start the istallation

Is there anyway in VPC to create two subnets, then throttle down the
bandwidth between these two subnets to simulate a low bandwidth
scenario?

        Where can I find manual for Virtual PC? It is not in the software
CD. Is there a book for this software?
Yonghui

is it possible to get technical details on virtual pc?
what i'm interested is register level programming
documents.
for example, my win98 installed on vpc shows the display

We have been working w/ VPC 2004 on our W2003 TS in order
to support a legacy app running MS-DOS 6.22.  
Problem is that one VPC session is taking 50% of the CPU
cycle, and when we bring the 2nd one up it goes to 100%

I'm a beginner in Linux and I just installed RH9.0 to
VPC. When I tried to boot the OS, it is just blank
screen. I used the default "S3" video card but I forget
to change the 24 bit graphics. How could I change it now?

I wonder how we can set resolution of Win311 for Workgroup to higher than
800x600 16colours. I need at least better colours.

for those of you doing the public beta of Virtual Server 2004....  VS 2005
was released to the public beta testers from what i can see...  looks pretty
darn cool but not sure if its going to beat out VMware at this juncture...
but i sure like the way they allow for managing servers ...