I have a NAT router connected to Internet dishing out 192.168.0.x addresses.
I've set up a virtual network that has an intranet of DHCP clients on a Local
Only network. One of the VMs is W2003 with the Local Only NIC static on
192.168.3.1 and a second virtual NIC using my Host's ...

I have installed, removed and reinstalled  msxml 4 (all parts) and VPC
repeatedly and cannot get rid of this error message, and cannot get VPC to
run (the task shows up in the list of tasks, but I can't get to it).
Previously VPC installed OK but I was unable to boot my OS CD Rom. ...

Is there a way to autostart a VPC session when the hosting
server starts up?  For example as a service so that it
doesnot require a user log in and manual launch?

I'v been running VPC 2004 for a while, with very few problems, but since i've
installed SP2 (on the HOST machine), it makes my whole PC lockup when virtual
PCs are running/booting. It's never made the host machine restart/BSOD, it
always just locks solid. I've tried dissabling ...

i have vpc 6 with win 98 first edition, and just want to know how i can share
my wireless connection that goes into a wireless routeer that gives out ip
adresses via dhcp. is there a simple way to handle this or do i have to set
up a own adress for the win 98 account. i would ...

Are there any known issues with SP2 (Servicepack 2) for Windows XP prof. Sp2
(professional) together with Virtual PC 5.2?
I have decided to stay with VPC 5.2 for technical reasons (better
compatibility with my guests).

In a multiple monitor setup, and running VPC in full screen (not windowed)
on the secondary monitor, is it possible to prevent VPC from minimizing to
the taskbar when accessing anything on the primary monitor (host PC)?  I
realize that at this point VPC will be running in the ...

When I boot up my virtual pc images, I typically create
drives back into my base OS for file transfers ect.  
However, I screwed up and deleted a file that I needed on
my base OS.  Here is the kicker; the file never went into

The VPC help file indicates that it is possible to configure
a new virtual machine to enable the partition where the new
instance of an OS will be installed to resize itself dynamically.
I did not see that configuration choice when installing and reading

There seems to be little to no information or discussion ANYWHERE on
remote distribution and deployment scenarios in a corporate
environment. Assuming an image is syspreped and ghosted what then? Has
anyone tried or does anyone know what the possibilities are for this?

I know that Slackware 10 is ok 100% under vp 2004 the only
think i can not get is the sound card recognise.During the
setup i get advise that can be a problem of kernell that
is sue but as i know that is ok under pc 2004 i wounder if

I wonder if there is posible to use Windows 3.11 on a Virtual PC and then
use shared resources on a Windows Server 2003 AD-network through the virtual
pc without having to disable SMB-signing on the DC.
I hope you got what I mean.

Up until now I have been copying virtual machines by the following process:-
1. Copy the entire directory to a new directory
2. Rename the new directory
3. Rename the vmc file

How do I totally remove all files associated with VPC for Mac 6.1? The
registration number from a previous version is in the EMac after all
files are trashed. When I try to install a V6.1- the old registration
number is still listed.

Anyone know exactly what's going to be in the service pack?
Is it just bug fixes and if so what?
Will there be any new functionality slipped in?