I am using trial edition 5.3.582.27.  I would like to use the Virtual Switch
option to enable local and host access, but I don't see how to enable that
configuration.  My current configuration is "Shared Networking (NAT)" and
that seems to work with LynxOS 4.0, but I can only ...

Deployed VPC on a WinXP Prof SP2 host.
Created an dos 6.22 Virtual machine.
Dos program to run needs a dongle to run.
Getting messsage during start of VM that a device has to be attached to

Greetings All,
I'd like to set up a single beefy PC and run two Windows XP VPC
sessions on it for remote access.
Is this doable?

Is it possible to do a snapshot of the VM 2004 (windows 2003 server) after a
fresh installation is finnished and patching is done? This for fast restore
if somthing goes wrong?
And is it possible to make a "image" of the installation so that I don't

When I installed Virtual PC I had an Airport Extreme network and my interne
connection on the PC was seamless. On Sunday I had to disconnect my Airport
Extreme and connected directly to my dsl modem. I couldn't connect until I
called my ISP and changed my setting on my Mac and ...

I have VMware installed with about 20 virtual workstation installed.
I am in the process of migrating to Virual PC 2004 for windows. Is there a
way to import all the VMware virtual workstations to Virual PC for windows
without having to install every machine one by one or work ...

VirtualPC 2004 is installed on HP omnibook xt6050.
WinXP without 1 & 2 SP is the main operating system.
Win98 is a virtual system
In WinXP

What I would like to achieve is the ability to start a virtual PC session
that automatically boots an OS (this I can do) but runs entirely in
background with no graphical interface visible. Is this possible?
Sincerely

I am unable to install Virtual machine additions on this Mandrake VM..
Never done this before with Linux so.  Should I be able to install the
additions?
Is so, is there something I'm missing?  When I try to install them.. nothing

I want to know if i have more than 3 virtual Hard Disk for which i have OS
as Win2000Pro, Win 2003 Server and WinME. is it possible that i can share the
memory of Win2000 in Win2003 server??

Hi,
I have an external drive connected to my laptop. How do I make my VPC (VM)
recognize this external drive?
Thanks,

I have created a C# test application with 40 timers (System.Threading.Timer)
that fire every 100ms. Each timer is associated with a class instance that
keeps a count of the number of timers the timer callback method has been
called.

I have set up 2 virtual PCs with W2K3 SP1 (the host for Virtual PC 2004 SP1
is also W2K3 SP1). I am trying to set up Network Load Balancing with the two
virtual PCs. I added a 2nd NIC with hard-coded IPs of 192.168.132.1 for one
and 192.168.132.2 for the other. I then used NLB ...

I have a legacy application (Jetscape Print Control 3.77) from Scitex that
communicates with an optical sensor on pin 9 of COM1 serial port.  I am
running this application in DOS 6.22 in a Virtual PC.  The application drives
a large injet printer and I am mapping LPT1 and COM1 ...

I've tried a few times to today to create a virtual pc with Win NT 4.0
TSE and each time is boms during the format telling me out of memory.
I many other virtual pc's with other OS's and they went no problem,
this one seems to need something special.