I have a laptop configured, via BootMagic, with  Windows 2000 and Windows XP
operating systems.
Is there conversion process/utility that can take the current configuration
and easily transfer both OS's into Virtual PC?

Is there a way to convert or copy a physical partition from the host to a VDK
file?

Host:Laptop, XP SP2, using Ethernet adapter, wireless disabled.
VPC: XP SP2 base install. Network set per instructions to accept DHCP
(standard install). Network does not pull IP just gets the usual 169.x.x.x.
Host Ethernet Works fine. It is set for DHCP and not issues with or ...

I have a VirtualPC that runs 100% CPU 24/7. Upon upgrading from a 2GHz to a
3.2GHz HT processor, the VM runs ~20-30% slower on the faster machine. Does
the Intel hyperthreading have anything to do with it and/or would Virtual
Server help me in this situation?

Hi, how do i change the 5900 default port on Virtual PC?
Thanks

i hope theres usb support
the graphic card can choose 16mb , 32mb, 128mb
with nvidia geforce 4 support
the virtualpc should support ddr sdram

In Visual Disk Wizard, it can compact a visual hard disk. But no option to
expand it.
I set up Windows 2003 with a 8 GB dynamic visual hard disk.
After installing sevearl apps, it complainted low visual hard disk. Since the

I have set up VPC on my laptop 20GB space free and 1.25GB RAM and am tring
to install Windows Server 2003 for a temporary test bed.
Windows installer gets to the Installing windows (after I have input the
Product key etc) and about 13 minutes to go and then seems to come to a

Most of my VPC 2004 images require me to select right-alt in order for the
mouse to move out of the VPC image back to my host. However, I have two that
don't require this which puzzles me.
Is there a way to make all of the VPCs so that a right-alt is not required

I'm using virtual PC on a Dell Latitude D505.
This laptop have a non common screen resolution : 1400*1050
This resolution is not available on my virtual machine.
I guess it's possible to add a resolution, maybe somewhere in the registry.

How should the network be configured in VPC to allow logins to a
virtual / test domain controller?

I am trying to install Win98SE on an XP box with the 45 day trail
verison.
I get to the point where
1) I have the Virtual PC Installed

Good evening all—
I have set up Virtual PC 2004 SP1 on a WinXP Pro SP2 host computer with 2 GB
of RAM, and one Broadcom Gigabit NIC.  I installed a WinXP Pro and Win2003
Enterprise Ed on VirtPC.  The problem is I can only install one adapter on

I am using virtual PC on a Windows XP machine to emulate a Windows 9x
terminal to run a legacy DOS application.
Several of the machines are connected to a 10Mb four port Netgear hub. The
old machines worked fine if a little slow. However the new machines (the

I recently ran out of disk space while running a virtual PC session, which
caused the session to not shut down properly. After I rebooted and DiskVault
made the 12GB that I had deleted available, I restarted virtual pc, but the
virtual machine is gone.