I have a Windows 98 SE virtual machine that works just fine.  However, when I
add a second drive to the VM, it hangs for a while (20-30 minutes) during the
boot.
The second drive I created using the vitual disk wizard, setting it to a

I posted earlier this year with "Virtual PC Freezes when host
disconnected from network". Bill Grant (thanks for the response)
suggested installing a loopback adapter. Which unfortunately didn't
resolve the issue.

I have problems getting a new guest system boot with Ghost trying to test
distribution with Ghost.
How do I make the bootdisk and wich "network" driver should I use for "local
host" boot ?

I am running Virtual PC under XP. I would like to know if anybody has had
experience of running Windows 2003 Server as a Client O/S under Virtual PC. I
have seen it done but it does not appear to be "officially" supported.

I installed os2warp on virtualpc.
I tried to enable parallel port but didn't work.
Do someone know why ?
Is there any parameters on bios or on windows 2000 to setup ?

I am unable to get a ping reply from my virtual PC to my host PC and another
3rd party device on the network.  My host PC and 3rd party device can see
each other and they can ping the virtual PC address.
I have tried both static and DHCP addressing with the same results.

Hello, after extensive tests I have come to realize that VPC (2004 SP1) have
certain bugs concerning SB16 emulation.
I have couple of old programs which have been (TODAY) verified on a real
computer with SB16, BOCHS, and DOSBOX to fully works and on VPC they don't

Virtual PC problem with LPT1 port.  The physical address is not in our
drop-down list for physical ports.
The LPT1/Parallel port is enabled in the system BIOS and is useable in my
Windows XP OS but not in Virtual PC.

I need to create a package with WinXP running Virtual PC with a Windows 95
installation. I need to deploy 50+ units in this configuration. I have  
Norton Ghost and a hard drive imaging machine to assist. Can I send my image
to the virtual hard drive? Can I partition the hard ...

I am sorry for my english, I am spanish.
In Virtual PC is not posible to see de harddisk D, but I have created them,
and selected in hard disk virtual 2
Thanks

I have a G5 1.6Ghz Mac running OS X Tiger 4.2, I installed VPC 7.01 and
when I bought it I got it as a standalone, and being so ignorant of
PC's I had to purchase on eBay Windows XP home . As it was installing
it never asked for the product key but later on the desktop after

Is it possible to boot från PXE in Virtual PC?

is it possible to install vmware (v4.5) and vpc on same machine
is it possible to have both running at the same time?
TIA.

I have a Danish XP, on my Virtual PC, and today I have installed the new
"Patch" via AutoUpdate, and now my "Virtual pc" image , continues to Reboot.
I can see a "Blue" screen 1000 of a Secund, but I can not read it ;)
Is it only me who have this problem ?

and my folder options is set to 'Simple File Sharing' which is usually all I
need to do.
thanks,
-g