I am trying to copy information to a new h/d.  I went into
the bios and it detects it as primary slave.  When I go
into windows it does'nt see the drive???
ANyone got an answer?

How may I clean or reformat dozens of 3.5 floppies for re-
use?  Thanks

Cdrom quit working. It knows that it is there because it
comes up on the boot screen. Go into dos and it says
C:\WINDOWS COMMAND\mscdex.exe/ d:mscdooo/1:G
Device driver not found :MSCDOOO

Help, I am having problems. I bought a 32MB Flash Disk,
which has 1.44 Floppy in "F" drive and the remainder in
Hard Disk on "E" drive. I have installed it on my lap top
with no problems and can save and open files OK. On my PC

I have just reinstalled Win98SE on my machine and lost
sight of 2 hard drives totalling about 70GB. This drive is
partitioned using Partition magic 8.0

I've got a Windows 98 machine which has one hard disk that
has been partitioned into 2, giving Drives C and D. Is
there any way in which the disk can be returned to its
original unpartitioned state, please, without disturbing

I know how to make a boot disk put how can i  copy the
Sys files on to a boot disk so they
LOAD AND INSTALL on my pc from the dike (in DOS) beucse
my pc will not boot one of the sys files got changed.

messed up real good.  cannot get past an "a" prompt even
using boot disk, says I am missing a partition, have a
virus.  Have W98 and need only to format and reinstall,
don't need to save anything.  cannot set up, format, boot

When I power on my disks spin, but I don't hear the
distinctive "beep" I usually associate with the boot up
process.  Usining win 98.  Screen also never comes on.  
Initially thought I might need a new monitor, but swapped

I have two computers and a single new USB hard drive, which came bundled
with Ghost 2003.
I'd like to use the drive and Ghost two make image backups of both
computers.  The USB drive is 80GB, the two computers are 60GB and 20 GB

My system is a WIN98se, with 128mg ram, 450mhz CPU, 40
gigabbyte hard drive.  I need to know how to Remove
Available Disk Driver Letters from the available list?
I have a couple of programs that continually try to

I have a gateway desktop with win98 se and I can not get
it to load windows. It won't go into safe mode, or do a
step by step process. I can get to the command line where
I tried to c:\windows\command >scanreg /fix and /restore

anyone know if i can transfer files from old pc to new pc
using printer port

  After formating a slaved drive my CD-rom drive was not
showin up on My Computor. It was working fine before it
was formated but now it doesn't show. It shows on my
Bios but not in windows 98 se. Can some one Help me???

I installed windows ME over windows 98 . If I uninstall
windows ME will I still have Windows 98. Will 98 be
affected?