I have had a computer since 1995,which was loaded with
Windows 95,then in 1999 I purchased Windows 98SE,I have
always had a small NEC 2.100 GB, HHD,recently I bought
Seagate 4.3 HHD,when I tried to loaded it,it went through

I just purchased the Pacific Digital 8X DVD R/RW drive.  
After installing it, I now get the following error every
time I turn on the computer.  The computer is useless
unless it's in Safe Mode.  The error is as follows:

What are the technical differences of FAT16 and FAT32

Hi, I have a problem. I try to use Fdisk to create a
primary DOS partition so I can install Windows 98. It goes
through two things (0%-100%) then says I must restart my
computer for it to work. I've tried to restart. I've

I downloaded a defragment utility from the web as the one
supplied with Win98 didn't seem to go beyond 0%.
After a while the machine re-booted, but then gave a Low
System Memory error, and nothing in Window will run.  

WHILE PLAYING ON LINE GAMES IT WILL FREEZE UP AND I HAVE
TO END TASK. PLEASE HELP ME OUT. THANK YOU  BY THE WAY
POGO GAMES

Approximately 8 months ago I began to notice that my
defrag wouldn't complete the operation. I wasn't too
worried, I had used only 40% (or so) of my space. Scandisk
seemed to work for a couple of months. However, since

Anybody have luck buying the upgrade microsoft used to
sell for $24.95 which upgrades Windows 98 to Second
Edition?
My problem is that I own both Windows 98 and Windows 98 SE

Recently I repartitioned and reformatted my 40 gb
harddrive using FAT 16 option. Drive "c" is only the first
2 gb of my hd and the remainder (38 gb) is nowhere to be
found.I know in fat 16 the hd partitions are a max of 2

the partition seems to work.  it's a 6 gb drive and says
the primary dos partition is 5.7 gb.  but when i try to
run setup for win 98 on it i get an error saying that i
need 7 mb of free space.  there should be plenty of free

i have a 3 1/2 floppy drive installed on my computer, it
somehow in "My computer", it was changed to a 5 1/4 floppy
drive...does anyone know how to change it back?
please email me at Fatboyslim135@earthlink.net

I am running 98 2nd Edition. I have not used my CD Rom
(read only) for a while. Today when trying to read a CD I
got the error message "E is not accessible". On the other
hand System Properties/Device Manager shows "the device is

I'm having trouble getting an additional 80G hard drive recognized in
fdisk.   Also, the computer will POST but not start Windows 98SE when
the hard drive is attached.  My machine is older, and so 80G is beyond
the motherboard's BIOS limit, but I have a PCI disk controller card

A client calls and tells you that after installing
Windows 98 on a 11GB hard drive only 6.5GB are recognized.
How can you fix this problem? (choose two)
A. Reinstall Windows 98 from the OEM CD.

I am interested in adding hard drive memory.  If I replace
the original hard drive with a larger internal hard drive,
how to I transfer everything from the original hard drive
onto the new one?  Do I have to replace the original or