My computer is under an extended warranty with the
manufacture, not with Microsoft.  However, it has gotten
a viruse.  The computer will start to boot, when it gets
to WIN 98, there is errors.  I never made a start up disk

trying to install canon bj-4300 printer,error mgs file
missing dmcolor.dll...insert disk 2 of win 98....software
installed on computer when received...no disk.
when?where?or how i can locate missing file?

I have a libretto 50ct, with a removable pcmcia floppy
drive. I can use boot disks on a:\ in dos mode, but I
receive the "A drive not accessible" in windows. I can
find the floppy drive controller when in safe mode only,

I have a floppy disk that cannot be read and I want to
destroy the disk.  I have pulled apart the case and cut up
the film part of the disk.  Is the data stored on the film
only?  I was told not to touch the round disk in the

Scan attempts prompts message to close utility disk. Can't
find.

Can you tell me how to dump a hard drive and re boot for
windows 98? Lots of bad things going on in there and need
to start fresh. Thanks for your help

Somehow during my rebuild of my system the Icon that shows
up for my CD drive now has a D-Link corporate logo icon
that it mus have picked up when I was installing a network
card. This is the icon for the drive that you see when you

Had a power surge couple of weeks ago and the only way now
I can start computer is with emerg. bootable disk and
win98 disk.
It goes immediately to select hard drive or CD rom..I

Does anyone know of an encrypting file system for windoes 98 so I can
encrypt data to a FAT32 USB drive dor safe storage
Bust be able to decrypt on a separate computer if required.
Michael

A couple of nights ago whilst on the internet, a message
flashed up on screen stating "d drive not accessible".
I later found my D drive is locked out,I cannot access it
at all. When I checked the properties for both C and D

I have an IBM thinkpad A20m with windows 98 Second Edition
4.10.2222 A
Recently my system became extremely unstable. I cannot run
defrag. and I get the following error message ALOT

My problem is that I downloaded microsoft's new Fdisk to
compinsate for my new maxtor 80gb drive so it can make a
fat32 partition and use all 80gb. Fdisk reads my drive,
finds all 80gb and makes a partition.. so far so good.

    I have a HDD with 16 physical heads according to the label
on the HDD.  When this HDD was installed, partitioned, formatted,
etc.,  a "Block Information" program shows this HDD has "128"
heads, which I assume to be "logical" heads.  What "logical"

Hi I just purchased a 2.5" HDD enclosure for use with an
old lap top drive and am not having much luck getting it
to work. According to the instructions with the kit I was
supposed to go to the Microsoft web site to down load a

While using CD to install Three In One Lexmark X6100
printer, I keep getting error message: 1sbfpm9x.dll.  The
installation process stops preventing me from continuing.  
Worse yet, Lexmark says to contact Microsoft "It's their