I got a curious problem that puzzles me.
I have a PI 200MHz system with the following drive setup (2 drives and DVD's
with the standard IDE controller, 4 drives via a Promise ata100 TX2):
- c: 2.5 GB standard IDE primary master

I have two W98 systems, with two very different IE Favorites Folder.
I want to combine the IE Favorites folder that is each machine, into a
single Folder.  In other words, append, versus export/import.
When I use import/export, as expected, one folder overwrites the

I have a phantom D: drive on my machine of zero size, the remainder of
the drives being moved up a letter.
My Computer -> Properties -> Perfomance shows "Drive D is using an
MS-DOS compatibility mode file system". I did not do this.

Win98SE.
I have an 80GB USB drive formatted to NTFS. I installed the drivers that
came with it onto Win98SE. I plug in the drive. P&P recognizes it and I can
see it in the Device Manager. But I cannot see it in My Computer or anywhere

O k guys I have the two hard drives in with the 8 gb set to slave and the 2
gb set as master. The w98 boots up but I dont believe it regonizes the slave
how do you set it to read it?  both have w98 on it already, what I would like
to do is format both and install it on the master ...

Hello all, I have a system with one hard drive divided into two partitions, I
have win98se on the primary partition and win xp pro on the secondary.  I've
been running this config for about two years with no major problems except
that several times now, the most recent being ...

Have be using Maxtor 30GB drive as second drive for several years without
problem via Maxtor ATA card. Recently installed Norton Systemworks 2005 with
Go Back.  Ran updates, and Go Back update "removed" Go Back info on drives
D,E,F (my partitions on this drive) during update process ...

I have had trouble with W98SE and LBA partitions.  I was getting phantom
drives on some PC's.  It turns out to be a bug in IO.SYS that occurs
when an LBA partition exists in or follows a 0x05 extended partition.
The problem is that when IO.SYS is calculating the absolute key to

I have 2 MP3 players and 1 digital camera - all of which happily connected
via a USB hub and appeared as removable disks when connected (F:, G: etc).
win98SE no longer seems to do this. Although the MP3 player still appears to
be recognised - (Looking in the System, Devices ...

Okay, I have a question for the experts here.
I have a dell dimension XPS D266 computer (pentium II computer, I believe).  
Anyway, this computer is running windows 98.  When the computer was first
setup, it had a C drive (8 gigs in size) and an NEC cd rom drive (setup as

Okay I am having some problems with my new promise ultra 133 TX2 pci
controller card.  When my machine boots up (its a ibm compatible computer
with an asus cusl2 motherboard), eveything is correctly recognized (my c to g
drives along with my cd rom drive and my dvd drive).  I ...

Have a laptop running Win98. I have a Windows 98SE upgrade
disk. Can I use this to make my laptop OS Win98SE without
loosing any settings?

I am running 98SE and need to reformat the hard drive. I have copied many of
the files and folders off onto CD disks. After formatting and then copying
the files back to the reformatted hard drive, they ALL show read-only attr
ibutes.  Some files need to be open for writing while ...

I want to add an 80GB HD to my Win98 system.
I know that 98 has problems recognizing drives bigger than 64GB, so my
question is this: Do I download the 64GB fdisk fix first, or should I connect
the new drive and then download the fdisk fix?

I am trying to partition a  blank 80GB hard drive with a Win98 boot disk for
a coule partitions. Even though I select Enable Large Disk Support and then
select N for use maximum space, it only shows that there is approx. 10GB of
hard drive available. I have checked this drive ...