I have an older laptop with Win98. The issue is that I do
not have all the required .cab files and therefore cannot
load the drivers for a 3com LAN card I just purchased. I
searched a win 98 cd but could not find the .cab files.

If no network connection is available I get the
message "there was no domain to verify your password"
or "domain could not verify your password".  This only
happens on 5 or six of the 100 or so windows 98 machines

I've now got ICS running well on my home system on the ADSL connection - I
was pretty pleased until I found that every time I reset one of the clients
it takes about 20 mins for the gateway to allow web access. It allows pop3
access and news immediately, just not web. Any ideas?

I am getting fifth machine which I want to add my home network ( Netgear
RT314 4-port router and 4 pcs: Win98, Win 98, Win ME and Win XP).
Do I have to get an 8 port router, or can I simply add a hub on one of the
ports?

I tried to change my networking password and got the following error:
Unable to change the password for Microsoft Networking because the
following error occurred:
The password cannot be used now.

I have a Win98 PC that was formerly attached to an NT
domain.  It is now attached to a cable modem.  Each time I
reboot the PC pauses for about 30 secs before loading the
desktop and apps.   I suspect that its looking for an NT

this is happening on a w95 client logging onto a w2k
domain. It happens after the user enters his password to
log onto the domain. I can log onto the pc with no
problems. His account is fine and he can log onto a

how do i remove the "enter network password" dialog box
that appears upon startup of my ocmputer WHILE STILL BEING
A CLIENT OF MICOSOFT NETWORKS.  This is because the
computer is only occasionaly connected to a network and

I need some help getting a win 98 machine to show up on a
xp computer network with a linksys router.

i have a windows 98 laptop at home (my wife's) that i would like to
get
on my home network.  I use a Netgear rp614 with a baystack hub behind
it.  when i set it up for dhcp i cannot get an address from my

I have just signed up on Roadrunner for networking. I have
an older computer with Windows 98, my computer needs to
have 98 SE or newer.  Is there a way I can up grade to 98
SE?

I am attempting to network (wired) a computer running
Windows 98 and one running Windows XP.  I briefly had them
networked and then for some reason the Windows 98 does not
see any computers on the network.  I have tried resetting

I have a very small network with 4 systems on it - 2
Win98SE and 2 XP Pro.  All are attached to a D-Link 4-
port DSL/Cable router.  Everything works fine in terms of
accessing the Internet.  However, the 2 Win98 PCs won't

I recently folowed the instructions of my internet
provider and removed and then added back my tcpip and
client for microsoft networks.  The client will not stay
when the system is re-started.

the file "LSL.com" which is a Novell Netware DOS driver
can not be found (ERROR MESSAGE) appeared while installing
Windows 98se on a cleaned drive ; can I skip and install
later or do I need to locate driver to install correctly.