I want to run the "net share" command under Windows 98 SE but it does not
exist. (it exists in WinXP). How can I share a folder using command prompt
in Win98. Maybe I can do it by adding something in the registry, nut what?\
I want to do it through another programm so I need a ...

My Win98 (Second Edition) machine has worked with my DSL modem for years,
now suddenly it stopped working. I cannot get any Internet connectivity.
When I do a winipcfg /renew it says, "DHCP Server unavailable". I've tried a
half dozen new network cards with the latest drivers, same ...

Recently networked two 98se and 1 XP system.
Here's the problem and not sure if networking is problem or not but no one
else, in other newsgroups(office, word.newusers), seems to know.
I have two HP722c printers. One connected to the XP and one to a 98se

While trying to install a 3Com Etherlink 10/100 PCI NIC (3C905-TX) on Win 98
the adapter device drivers do not install and have the following error:
"The NDIS.VXD, NTKERN.VXD device loaders for this device could not load the
device driver (Code 2) Update Driver... Upon doing so ...

i'm working on an AMD-450 with win98se that lost it's network ability.
(using a standard 3c905 net card)
IE cannot connect to anything...nor can i ping anything...
to make sure all the HW was OK...i did a clean install of win98se

After disabling McAfee and ICF I am able to ping both ways (xp>98 &
98>xp) by address and name but I still receive the "Unable to browse
the network" message from one 98se node in network neighborhood. Also I
have noticed that the 98se hangs on the [network neighborhood] icon in

I have following problem on printer sharing on Win98.
First machine with Win98:
1) I have printer HP LaserJet III, attached to a machine having Win98.
2) I have enabled "Printer and File Sharing" on Win98 machine.

Hello from a "newbie":
This past weekend I setup an in home two station network.  My home/office
machine runs XP; the wife's desktop runs 98se.  The two machines are
hardwired via Cat5e cable to a D-link router which is connected to a DSL

I've noticed the other posts and realize it's a pain troubleshoot 98>xp
but thought I'd try.
I have two 98 se pc's, three xp's and a router. I have sbs 2003
software on the way to install on a new server. The xp's and one 98 can

I have read the other posts on or  near this subject .. I think mine is just
a little different as follows:
I  have a new Windowsxp computer and want to be able to transfer files files
from my

First thank you very much for trying to help out.
Although I am going to talk about DCC the issue is actually very much
simpler per below.
I am trying to use Direct-Cable-Connection (DCC) which I have successfully

I am attempting to map the home directory from a windows 98 client.  What I
would really like to do is some sort of client detection and then run the
proper script.
I was able use net use h: /home but when I look at the mapped drive in my

Yes, I realized this is very similar to a recent post, but is different...
Previously I had the xp sr2 home machine connected through a wireless USB
adapter to a Netgear router, and the 98se machine connected through a
crossover ethernet cable to the xp machine.  Both machines ...

I have set up a network with 4 PCs, they are all connected to a switch, also
on the switch I have an ADSL modem for the internet. On 3 PCs I have Windows
XP running and I had no problems setting up the ADSL internet on those PCs,
but I can't set up the ADSL internet on the PC ...

i want to start the network+ ineed some usefuul free pdf links
that can help to my information.
tanks for your helping