Is there a limit on the number of clients a win 98 computer can share
files to?  I seem to remember that it was 8 or 10 concurent users.

Given: Lexmark Z55 connected to WindowsXP Pro. LAN connects another machine
running WIN98SE. Driver for WIN98SE was downloaded to the XP. Need guidance
setting up the printer via network for the 98SE.
While attempting to setup the printer from the 98SE using the printer setup

Issue: Lexmark Z55 connected to WindowsXP Pro is seen on LAN by Win98SE but
doesn't appear when attempt is made to print from the 98SE.
I recall downloading a driver to the XP machine and extracting the files.
Nothing was done on the 98SE. My insticts tell me to find the printer on ...

is it out there?

I had installed Kerioa Firewall 4 software in past and removed it.
Unfortunatelly there remained some trash on the PC, which I removed
manually (all files and all registry entries).
I installed ZoneAlarm and removed it. No problems here.

first of all, I really think, that this is a Win98 and not a WinXP problem.
I had a fine working mini-network with the following configuration:
                       INTERNET
                          |

My Win98 machine refuses to see my Debian and BSD systems in the
Network Neighborhood.  However, "net use ...", issued in a DOS window,
quickly establishes a working, browseable drive mapping without any
problem--the mapped drive even shows up in Windows Explorer.  "Find

I have a series of Windows 98 SE computers all connected together. One of
them has a large LaserJet printer that is shared to all the other computers.
This has been working fine for years.
Yesterday the printer suddenly became inaccessible. I looked over the

I can get to the internet with either computer on my network, but
cannot browse on either one. How can i fix this? Thanks

I'm embroiled in getting an XP back onto my original LAN to join WIN98SE and
WIN95 machines... one each. When I changed workgroup names yesterday in an
attempt to match one created on the XP, I was asked for the disc for 98SE. I
inserted it but had it rejected. I then selected the ...

Hi, I need to image a lot of P3 PC's with Win 98. They do not have CD
drives or stiffy drives. At the moment, I boot each one with Acronis
from an external USB CD drive and transfer the image to each P3. This
takes a long time!

D-Link 524 to cable modem.  Laptop e-machines built-in 802.11g.  Old desktop
with Gigafast USB wireless device.  Both computers can access internet.  Have
used XP wireless wizard to setup workgroup.  Goofy thing, when it tells me
that I can make an XP setup disk to use on other ...

Cable modem (Earthlink), Ethernet.  Computer worked fine before move
(different ISP) connected to Internet via cable modem.
Stuck with the 169 IP address.
1.  Tried renew/release IP info through winipcfg...get DHCP Server

Can no configure windows 98 for internet. PC was configured for small LAN,
internet connection was via ISP router
(broadband, via cable). Now i moved in another location and there is another
ISP, via cableTV(broadband cable modem).  ISP say, modem is already

Every time I boot up 98SE I get a prompt inviting me to enter my Network
Password
for Microsoft Networking that pauses the boot until I cancel it. This has
only started since I installed a Voyager 210 router and whilst it's not