My husband and I are building our first computer from the ground up and it
has been serious rough going!  We were both wondering how much hard disk
space needs to be partioned for all of the Windows 98 components to properly
load on our system?  We have a 10GB hard drive and ...

I have a PC with Win98 Italian version installed.  I would like to install
the English version.
Question is:  Do I need to format the drive and install fresh or can I
re-install English over the top?

I need to re-install win98_se on a friend's computer. He has lost his
original w98 cd though.
I went to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion
and recorded his Product Id and Product Key.

I need help with my computer crashing.
I've an AMD Athalon XP w/504MB RAM running Win98 Second Edition.
The computer often crashes (no mouse response, no cntrl-alt-del) after
startup finished.  Even pressing the reset button sometimes does not

I had a home network between a Pentium4 running XP Pro and a Celeron 1.2mhz
running W98 2E. I've just swapped the Celeron chip for a genuine PIII 1mhz
chip and now I can't re-establish the network. The PC itself works fine. If I
try to set up a shared  folder on the PIII I get a ...

Hi and thanks for looking. I want to get rid of a sign-on diolog box. I got
this CPU from a yard sale and I deleted the Profile under Windows direcory
but the stupid box keeps coming up asking for a password. I tried changing
the passwords from singel user to several users back and ...

My computer was working fine up until last week.
Windows 98 will no longer boot up on my computer.
If I try to boot up normally or in safe mode, I receive the following
message: Data error reading drive C

I have just bought a win98 tower, and it has a net-lynx pci card in it, I do
not know a lot about computers, but should this not allow me to get 800 x
600 resoloution. I tried using an ATI card from an old motherboard, but upon
Boot-Up the hard drive just beeped a few times, and ...

I just built a new PC and get the "Windows Protection Error loading NDIS -
You must restart your computer" on my Win98(1st Edition) bootable partition.
My XP partition works fine. I have a P4 3.0ghz. I found article Q312108 (
http://support.microsoft.com/default.aspx?scid=kb;en-us ...

After removing juno, and netscape when I boot win 98 I get
Explorer causede an invalid page fault in module explorer @ 0167:00401f31
Can't get by it even in safe mode any ideas how I can resolve this.
Thanks for any ideas

I am trying to crank up this old celeron 333mhz. po meg ram.
I formated the useing a win me boot disc. format c:
Useing the win 98boot disc i could not format useing that command.
Winn 98 se installination went as far as remove any floppies etc and

Got a used program from 1997.. one diskette seems (lit) stuck...
the little window desn't open up that freely
                - = -
   Vasos-Peter John Panagiotopoulos II, Columbia'81+, Bio$trategist

I am wanting to upgrade from windows95 to windows98. Which would be the best
one to upgraade to windows98 or windows98se? I am assuming the SE stands for
Second Edition.

A friend has this old pc with win 98. It will only boot with the win 98
cd in the rom.
I tried every combination of boot sequence in the bios, the only 2 that
will get the thing going is c, cd rom  or cd rom , c.   A menu will then

First thank you very much for trying to help out.
Although I am going to talk about DCC the issue is actually very much
simpler per below.
I am trying to use Direct-Cable-Connection (DCC) which I have successfully