Security - Firewalls

Thread preview

Thread	Last Post	Replies

WIN 2003 Server Firewall is blocking GPUPDATE Keberos Problem	30 Apr 2006 15:07 GMT	1
I have validated that the firewall on the server is the culprit. When the firewall is turned off all computers on the domain can update the GPO. I have done so with GPUPDATE. When the firewall is turned on I get the following event ids in the
Conflict with nbtstat tools	29 Apr 2006 16:15 GMT	1
I have a problem with MrxSmb and event id: 8003, i execute nbtstat: APOLO <20> UNIQUE Registered APOLO <00> UNIQUE Registered APOLO <03> UNIQUE Registered
How do I turn of the Firewall?	29 Apr 2006 00:27 GMT	5
I mean really turn this off. In the Control Panel, my Windows Firewall settings show that Firewall is OFF (not recommended - although, thank you very much, I'll make my own decision on this.) Despite this, I get a bazillion of these entries (below) showing up in my
PORT 80 and or 8080 Traffic not getting in when Firewall is enabled	22 Apr 2006 18:30 GMT	4
I am running a GC server (my only one) with IIS 6.0 enabled. I have created a default web site that works on the LAN as well as external requests when the firewall is disabled. Folks outside my domain have gained access to the site.
two LANs sharing an Internet connection	22 Apr 2006 01:53 GMT	2
How do I split a LAN into two LANs which cannot see each other? The idea is to have two LANs sharing one Internet connection while keeping the two separated, not being able to see each other.
W2k3 Sp1 firewall unreliability	19 Apr 2006 22:30 GMT	2
I have been working up a new IIS server, which is still standalone and not yet with any IPsec policy assigned nor with SCW template applied. So far, it has just had a set of temp IPs assigned, IIS roughed out with these, pools, sites, and content transferred onto it.
WinXPpro sp2 how to reset firewall	14 Apr 2006 10:27 GMT	4
How do I reset the Windows firewall so it will once again ask me if I want each and every program to access the whatever network is being used Ethernet/dialup modem on COM1 or whatever ? I have been trying to block Valves Steam account from access to the Internet by removing it as ...
IIS Problem with Winxp and Windows server 2003	12 Apr 2006 19:15 GMT	1
I have created an ASP.NET Webservice that runs on IIS Server. It works fine with Windows 2000. When tested on XP and 2003 we get an error saying cannot connect to the server.
can't ping winXP box from linux	11 Apr 2006 15:01 GMT	2
I am having a lot of difficulty/frustration on this problem and I was wondering if you all had some thoughts or advice... I have two computers that I'm trying to get networking with Samba. One is WinXP Pro, the other is Fedora Linux. The computers are connected
Firewall Cisco Pix 506E	07 Apr 2006 04:45 GMT	1
Who can help me? I need configure this firewall for vpn. I want have a VPN between my office and some portable users. How do I do?
Windows won't issue IP address	06 Apr 2006 17:18 GMT	2
I have 2 NIC cards on my laptop 1. built in Intel which is connected to Internet through DSL router and has Internet Sharing enabled 2. Linksys PCMCIA card. This has static IP address and PING to the card is
limit computers	03 Apr 2006 07:51 GMT	2
how we can limit network that only specify computers can connect to network, we have dhcp server on the network so we want only specify computers can obtain ip address from dhcp server becuse some clients have labtops and connect to network and use of internet
Unable to access Windows Firewall settings	03 Apr 2006 07:49 GMT	1
I have been trying to access the Windows Firewall settings to modify them, but every way I try to access (via Control Panel, run: Firewall.cpl) I get a message that says "Due to an unidentified problem, Windows cannot display Windows Firewall settings".