below is a report of active NAT sessions from my router, doesnt matter what
i try to do wont disconnect any of these connections to my local machine
192.168.1.25.
Any suggestions?

I have a home network setup with 3 XP computers (one has Pro, one has Home
Edition and the other has Media Center Edition).
All three are connected through a wireless router; one is connected to the
router using a cable.

Why when a rule is created for an application there is no integrity control
on it.
No MD5, the firewall check only if the path is correct.
thanks

Is there a way to block outgoing traffic going to a single port without
installing a full firewall application?  I am doing some SMTP testing and I
want to make sure none of my test mails get out but I need to leave DNS and
other services available.  I don't have any firewall or ...

What ports should I block with my firewall in Windows XPThanks,
Marsha

I did a port scan and discovered my port 21 was open. How do I block this
port or put it into stealth mode..
Cheers Peter..

I'm having a strange network problem, and I hope this is the right forum to
address it. I have a computer running Windows 2000 Pro connected to the
Internet via dialup modem. I have been sharing this connection with another
machine, running Windows 98, via ICS. It has worked ...

Hi all...
I have 2 computers on my home network. Is there a way to get the
firewall to access my files and printers without having to manually turn
off the firewall? In other words, how can I set both computers to access