My monitor displays a greenish tint. Is it going bad?
I purchased a new monitor but it only works if I switch
the cables while the computer is already on. The monitor
will not display from a cold boot. Do I need a driver?

When I boot up my ME edition I get a blue screen and an
error message  0E-0028-C0283C3C
Associated with File:\VMM(12)+00004C3C
How do I fix it?

I have started having problems burning CDs. I get a low HD
memory error.  I installed a 120 GB HD, but still get the
same error. When I check my virtual memory, with Windows
controlling, it shows that I have - 19673 MB availible.

Help.........my system says I have only 6.44MB of physical
memory available. There are 11 critical updates needing
installation. Should I install more memory? This Compaq is
in its original state of just 63MB. Under "System

i was woundering if anyone can help out on how to format a
computer hrad drive with windows me?

Anyone have any experience using a Creative web camera with ME?  I
seem to get an "out of range" error on my monitor when starting up.
Could you reply to me as well as the group.  Thanks.

i turned my computer on today to find that all desktop
icons had disapearred and i had to reboot in safe mode to
eventually get them back.i only had the start tab and
clock in the taskbar but didnt have access to them.

Everytime I put the card in I get message titled
"PC Card Troubleshooting Agent" which states:
"windows is not able to identify or use the inserted PC
card device because there is no memory area available to

can i enable dma,direct memory access on my c disk and d
disk drive,to gain faster performance? Both disk drives by
default are disable for dma operation.thank you.

I have a 2000 server that has been crashing for a few week.
The event log only give met the following information. I
have applied all service packs, latest drivers etc. Help
The computer has rebooted from a bugcheck.  The bugcheck

I just recieved a microsoft optical mouse as a present and
I was wondering if there was a download that I could get
so that it would work?  I says that it requires 2000 or
xp.  Is there anything that I can do to make it work with

Hi,
I am trying to install an ADSL 500 modem from BINATONE
(USB 1.1). I get through part of the installation with the
install program and I am prompted:

I've got a Presario 5000. The problem seems to be with the
Primary Ide Controller. When I attempt to go through the
tutorial that Compaq has, there is no "NOIDE" entry. What
I have is (Default) (value not set), Start 00, and

I've got a Kodak multicard reader, when I go to plug it in
ME starts to detect it and load it, but when it gets half
way through, it locks up with the blue screen and has an
error message that has "ntmaphlp" in it.  I've looked on

i continualy receive SCSI/ATAPI command timeout error when
trying to burn audio cd.  buslink drive just a year old
and was buring fine, when trying to burn a second cd in
one session i received the error and havn't been able to