I don't know if this is the right place to ask for help but
my computer is doing some wierd things so if anybody has
any suggestions on what to do please do! Basically, ihave
windows millenium and I just uninstalled internet explorer

Had a TEAC CD-W540E put in because my Adeptc CDRW &
Standard CD DVD player switched drives then completely
went away.  Now when I try to access the program to burn
anything to a CDR or CDRW, the message is No CD or CDRW

My speakers ceased to work after installing a new wireless card in my
computer. I've tried reinstalling drivers from the Hewlett Packard site,
but that didn't help.
One thing: All the help I've found about this issue has said to look for

Needing to reboot off disk (A:\) - am at the DOS command
prompt, but don't know what command to use!?!
NO FAQs include how to RUN the reboot disk.
Any suggestions appreciated! - Alison

The monitor that came with my computer died, so I
obtained a different one.  When i start the computer, ME
displays an "updating hardware database" dialog box.  The
progress bar does not move from 0% and the system hangs.  

A popup continuously shows up saying..."problem with
shortcut blah.Ink (different beginning but always ending
in .Ink). The location could be on a hard drive, network
or on a different computer. check to make sure disk is

I'm trying to create more free space on my small C: drive.
I have a file in SYSTEM(C:)>WINDOWS>TEMP called "sr1patch"
that is taking up 26+ MB of space--and believe it is
already functional in another area of my computer.

I checked my HP manual and it said I could upgrade my
memory modules to a total of 512mb. I had 2-128mb MICRON
TECH brands in b-4 I started. I ordered 2-256mb PC 100
DIMMs from HP. I had alittle problem finding the correct

I am running a pII 400mhz with windows me. I have an 8 gig
hard drive. 7 gig of which has been taken up by a file
c:\Restore.
How do i reduce the size of this file, or how do i delete

Here is what may be a very stupid question.
I have a computer with a non-functioning monitor. If I
hookup my other monitor to the first computer will it
display or do I need to add software for the monitor to

I was looking at the bootlog.txt file and noticed > Dynamic load failed= c:\windows\system\mrci.vxd= file not found
There is a mention of a windows\system\vmm32\mrci2.vxd= load successful. Is mrci2 taking the place of mrci
What is the function of the mrci.vxd, and should I be ...

vwin32(5)+00002883 vmm(01)+0000bdco oe:0028:c02a5a5b  
oe:0028:c000cdco  oe:0028:c0031522  oe:0028:c0030cf9  
oe:0033f:000258a .any clues would help

I have an older system that I have tried to upgrade on a irregular basis.
my master drive is a 6 gig 5400 rpm and the slave is a 20 gig 7200.
How can I upgrade the old master with a new 80 gig 7200 and not
loose the ME operating system on the old master.