| Thread | Last Post | Replies |
|
| Corrupt Boot Sector | 30 May 2005 18:35 GMT | 8 |
HELP!!! I can't boot-up or access files/folders on my 80GB Western Digital HDD (WD800). I'm running Windows Me with 256MB of RAM on a 600MHz custom PC. I use Roxio GoBack on the corrupt drive, as well as System Restore. I also used McAfee VirusScan v.9 from a virus-clean disk in ...
|
| Buy memory- where? | 30 May 2005 12:23 GMT | 18 |
I also recommend installing another 128 MB, or 256, if funds permit, of what is most likely PC100 or PC133 sdram. Perhaps, $US 25 - 45, after common rebates from major memory vendors through big box retailers. Lower price over the Internet.
|
| Graphics Card Problem & error code 10? | 23 May 2005 15:46 GMT | 34 |
What does an error code of 10 mean when one uses msinfo32 and highlights Problem Devices and the right pane shows Device PNP Device Id
|
| Choosing Hardware Profiles in Windows ME | 23 May 2005 13:24 GMT | 1 |
Three hardware profiles exist on Sony PCG-XG700 laptop running Windows ME: Original Configuration, Docked and Undocked. Yet, when I boot up the PC I am not ever prompted to choose a hardware profile to boot into so I am unable to try different hardware profiles. How do I get ...
|
| unistall windows me | 20 May 2005 22:45 GMT | 19 |
I need to uninstall windows me and return to windows 98. however i didn't not save the option to return to 98. i don' t want to format the hard drive as i'll lose loads of preinstalled programs on my laptop. any ideas? Can i delete the windows folder, make the computer crash and ...
|
| CD R CDRW drive locked | 20 May 2005 21:14 GMT | 1 |
I hope someone can give me some insite as to what is happened, A few days ago I turn the computor on and 3 programs did not load correctly, Norton, Adaptect aaand zone alarm. The day befor no errors or any problems and system shut down fine. I atried to do a scan disk thinking I had ...
|
| USB has 2 ports but only reading 1, it used to read 2 ?? | 19 May 2005 09:07 GMT | 2 |
I use my broadband modem in 1 of 'em I used to use a lexmark printer in the other...worked OK, but then i got an EMPREX WebCam and it just will not recognise it being there.... I tell a lie...it recognised it about twice in 100 connection attempts?
|
| USB/Firewire in Windows ME not working | 16 May 2005 16:48 GMT | 2 |
Computer: Sony Vaio PCG-XG700 running Windows ME, w/ 256MB RAM, PIII 750MHz. Problem: The USB and Firewire ports do not work. In Device Manager Intel 82371AB/EB PCI to USB Universal Host Controller and Sony CXD 3222 OHCI i.LINK(IEEE 1394) PCI Host Controller both have a yellow
|
| Problems with Drivers. | 15 May 2005 15:28 GMT | 7 |
Co-worker bought new Dell and gave me old Dell L700cx with manuals, CDs, etc. There was no anti-virus program and the computer had many viruses on it. I have replaced the battery (I did not notice anything drastic changing after replacing the battery- I did take digital ...
|
| DVD Drive deos not recognise DVD's | 09 May 2005 13:50 GMT | 2 |
I have a Samsung DVD ROM and for some reason when I insert a DVD it does not play. Even if I go to My Computer and click on D: it tells me that there is no disk in drive. Any suggestions?
|
| WinME doesn't display all partitions | 05 May 2005 15:21 GMT | 8 |
I have posted this already elsewhere, but not found a solution yet. Trying to partition a Maxtor DiamondMax Plus 9 120GB hard drive as an EXTERNAL mass storage drive via USB2.0 I have run into a problem that I can't seem to resolve and I hope to find some advice in this forum.
|