I'm trying to install the protocols netbeui and IPX/SPX on
a Windows Millenium machine - the protocols ARE in the
selection box - but after I select it it just brings me
back to the 'Select Network Component Type' without adding

I have a DSL internet connection. I need the dial-up
connection to start automatically when the system starts,
how I do this?

I have had intermittent problems with my wireless network for a year, mostly
transferring large files.  After trying other things and looking hard at the
behavior and my networking texts, I have a theory as to what is causing
it -- The receive window being used by TCP/IP is larger ...

    My computer running ME will not obtain anywhere near
the connection speed of my other two (one running 98 - the
other running XP).  My DSL provider waled me through
looking at the device manager and we discovered there are

I am trying to setup ics between  Win Me and a Win XP and
everytime I run the network setup wizard and go through
the steps at the end the error always comes up "netconn
has caused an error in netconn.exe. Netconn will now

I have a wireless network using the Microsoft 500 base
station and 510 adapter.  One computer runs XP-Pro and is
directly connected to the base station.  The other
computer runs ME and uses the 510 adapter.  

I am using Me(Laptop) and a wireless Lan card.  When I try
to connect to the interent, dial up appears.  If I set my
properties to "never dial", I just get "network not
detected". I check my winipcfg, and my ap is 0.0.0.0.

Okay, I have a new problem. I have two computers each with
internet sharing installed. The connection, which is qwest
dsl, works, but is very, very slow. I have run diagnostics
on my ethernet card and it is fine. I went to check my

No protocol netbeui on add protocol. only atm call manager
and atm emulation client.

just wondering if anyone has gotten a reply to these
posts?  i've read a couple prior posts, but haven't seen
that many responses, if any at all..
j

I'm trying to use the ics to connect xbox live i have to
share the connection because i have a usb modem, but
evertime i get to the end of the home networking setup it
says error in nexconn exe.

Does sombody know if there is a IPV6 Protocol availible
to be loaded in the network stack of winme to be
connected on a IPV6 network?
Erik-Jan

Several years ago I was told how to disable the logon
prompt. I now want to enable it as I have a home network
and the logon is required to access other computers on
the network. To get the logon prompt I have to logoff

all of my networking variables are in order. tcp\ip
settings are O.K. I am getting an IP from my ISP and can
ping various ip's. But cannot can access to the internet.
Any help much appreciated.

I have 2 computers both running windows me, and connected
together with a linksys 4 port router, i was wanting to
know if i could set up my computers to share 1 webcam? i
have tried to set up so called remote webcam viewers but