I've got an ATI X800 PCI-E card as my main adapter, but I've got a Radeon
9250 and Geforce FX5200, both PCI. With Beta 2 I tried both cards and niether
worked, the driver for the 2nd card wouldn't load.
At the moment I've got the 5200 plugged in and its not working, but I read

I have a problem with 2 hardwares.
First is the Nvidia 5200 card with 128mb.
At some point during the operation, the Vista restarts itself and gives me a
fault in the nvlddmkm file. Also when i am trying to run media player it

My CD & DVD Drives quit working.  When I insert a CD on either drive, it does
not Autorun, nor can I access through Explorer.  I check Device Manager, adn
it does not show any problems with the drives.
Any suggestions?

I cannot find drivers for the above drive... has anyone had issues or found a
work around?

Don't forget Vista Drivers for your own fingerprint reader(s)
Thanks,
Bruce

I am running RC1 with a NVIDIA GeForce FX5200 video card (Microsoft Drivers)
at 1280x1024 connected to an Envision EN1410 LCD monitor configured at 60Hz.  
My question is, why are the icons SO H U G E ?  I have installed the Envision
driver but it did not change anything.  Is ...

Ok I too had my mouse, just flat out not working. It is an optical USB
Logitec run of the mill 30 dollar model or so. I just unplugged it from the
USB powered hub, which is not under powered, and plugged it into on open port
on the back of the machine and pow it worked!

Afert installind i tryed to access bios but i cant, in system startup i press
F2, message is showed that going to bios but windows starts, witout goint to
bios.
How to i can go to bios????

Since I installed RC1 I cannot access my DVD-ROM, CD-RW, or DVD-RW drives.  
When I check the properties of the drives in Device Manager, this is the
error message that I get: A driver (service) for this device has been
disabled.  An alternate driver may be providing this ...

Tom your donation was not helpful, it's MOOT!
If "VISTA" has a remedy, then why isn't it "POSTED" all of the current data
is diseminated, however it is non functional, it's not allowing MS Office 12,
it says it does not recognize the program.  When I tried to update it it told

I have a Sony Vaio SZ120P laptop.
Under audio in device manager, it lists SigmaTel High Definition Audio Codec .
I have a Intel 945GM Chipset motherboard.
My microhpone fails to work though for some reason. Everything else seems to

I got a creative SB 2 ZS sound card
it works fine for xp.
and when i goes to vista
it works for 15 sec then there is no sound

I have an HP 7030us notebook. It has a touchpad mouse built in. I don't use
it, I bought a wireless notebook mouse. My issue is this, in XP, I could
disable my touchpad, and just use my regular mouse. However in Vista I
haven't found out how to do that. My mouse settings will ...

"The capability of your network adapter does not match the requirements of
this network."  Using a Gigafast WF721-AEX card on a Dell laptop.  Also tried
a Netgear MA401, and it didn't even install properly.  Both cards appear to
install properly with factory drivers.  No utility ...

I have a question regarding my ATI Radeon X800XT resolution:
In WinXP I can get 1920 X 1200 @ 32 bits, but in Win Vista RC1 5728 ( as it
was in previuos builts) I can only reach 1920 X 1080.
This is the maximum resolution I got either with the built-in drivers or