| Thread | Last Post | Replies |
|
| Nivada refresh rate | 04 Oct 2006 16:44 GMT | 2 |
I have a Nivada FX5200 AGP graphics card. I keep getting the anoying flicker. Was hope that someone would know if they have new drivers yet? Thanks, Curtis
|
| WD SATA Drive configured by Vista as a SCSI Drive | 04 Oct 2006 14:58 GMT | 3 |
My hard drive seems to be working overtime and when I checked it in the Device Manager I noticed its listed as a WD SCSI Disk Drive when its actually an SATA drive. Went to the WD Website and the same old story "Western Digital does not
|
| Enabling extended desktop with multiple monitors doesn't work | 04 Oct 2006 14:30 GMT | 1 |
I have a Dell GX280 with a built-in Intel 82915G/GV/910GL Express Chipset Family that supports two monitors. I recently installed Vista RC1 (5600) as a clean install and everything went fine. When the desktop comes up I see a mirrored desktop on my two Dell 1709FP
|
| ATI X800XT resolution fixed | 04 Oct 2006 13:45 GMT | 1 |
I had this small problem, that was my Radeon X800XT would only display 1920 X 1080 @60Hz 32 bits. My monitor is a BenQ FP231W, with a native resolution of 1920 X 1200. What I did was to put the PC in "sleep" mode, and after "wake-up" the
|
| Anyone know "all the hardwares" that work with vista? | 04 Oct 2006 05:25 GMT | 1 |
Does anyone know "all the hardwares" that work with vista? Please help me Thanks
|
| Freaking Sigma-tel Driver! | 04 Oct 2006 04:40 GMT | 9 |
Alright, I tried installing the Inspiron 6000 xp driver... I tried the e1505(or whatever it is) driver... I have to know if there is any kind of actual fix so that my headphone/microphone jacks work.
|
| Vaio VGC-RA 820G and Vista Media Center | 04 Oct 2006 04:37 GMT | 2 |
This Sony desktop gets its lowest rating in Vista RC-1 from the video card, 3.4, which is understandable, it's ATi's x300 which seems to be the bottom-of-the-line in PCI-e vid cards. It did work fine with the (unknown) MPEG encoder/decoder for XP Media
|
| Adaptec SCSI and IDE periphrials. | 04 Oct 2006 00:00 GMT | 1 |
I was told via Email today that Adaptec has no plans to support Windows Vista in alpha, beta, RC or final stages until after 2007!!! So what can I do if I use the 1200A raid controller do I have to reformat my raid just to put this on? Surely there is adaptec support in windows ...
|
| ATI drivers | 03 Oct 2006 22:40 GMT | 1 |
While looking for drivers for my Radeon 7000 I found a package from ATI with more than 70MB. This is a little bit -ehm- fantastic? Crazy? Is there somewhere just a small driver with 600kB? I think I do not need more!?
|
| Logitech USB Driver | 03 Oct 2006 20:52 GMT | 5 |
I have a headset via USB. Its a Logiteh 200. Vista will not recognize this USB headset, therefore I have no sound on my system. My only speakers are hooked to the main computer. This Vista is a secondary (test) computer.
|
| Adaptec 1200A RAID (IDE) | 03 Oct 2006 18:56 GMT | 1 |
Ok it says that the Vista inspect doesn't like the driver for my 1200A IDE Raid card from adaptec, since this is function under XP SP2 will this create a problem with Vista RC-1? I would hate to have it half installed and then turn all my hard disk to a waste land :)
|
| What are Vista’s hardware sweet spots? | 03 Oct 2006 16:53 GMT | 7 |
What are Vista’s hardware sweet spots? I mean, what the amount of RAM, Processor speed, hard drive speed & video card to efficiently run a business, enterprise or ultimate Version of Vista in a business environment without breaking the bank? If not, do you know where I can find ...
|
| No Internet | 03 Oct 2006 16:21 GMT | 1 |
I have a linksys network adapter that nneds drivers for Vista. Installation told me to go to wundows update but the network adapt.er is my internet connection. Can someone point me in the right direction? Ernst.
|
| New Realtek audio drivers 30 September | 03 Oct 2006 14:58 GMT | 2 |
Has anyone tried these drivers yet? I am currently downloading them at a measly 5KB/s! I tried the previous version but ended up with no sound at all and messages telling me they weren't proper Vista drivers. I couldn't uninstall them, so I
|
| DI-624 Router- if I configure it - works in XP NOT in Vista | 03 Oct 2006 14:55 GMT | 8 |
Since going to 5728 and updating the router's firmware, if I use the configuration wizard as I normally do then I can only connect to the internet using XP but not Vista. I have to keep clicking the factiry reset button to get Vista to connect!
|