Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsWindows VistaWindows XPWindows MeWindows 98Windows 95Virtual PCInternet ExplorerOutlook ExpressWindows MediaSecurity
Related Topics
MS Server ProductsMS OfficePC HardwareMore Topics ...

Windows Forum / Windows Vista / Hardware / December 2007

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Line-in to sound card - no sound, no volume display02 Dec 2007 02:31 GMT3
Phonograph player into line-in on SigmaTel sound card has no sound. This
worked w/ XP, stopped after Vista installed. Speakers work fine on everything
else.
Windows Vista help says go to speakers properties, & lin-in is mute by
Windows vista will not let me use my second graphics card.01 Dec 2007 22:31 GMT4
Hi running my pc under windows xp it will let me run both 8600gt in sli mode,
but since shadowrun is only avalable on vista i had too install that, but for
the life in me i can not get windows to run my second card. no matter what
driver i install it always says.  This device ...
Disk drive won't open01 Dec 2007 22:02 GMT2
A cd is in the drive of the laptop and 'eject' is not working? It's stuck.
Suggestions?
Aero- INTEL 82915G/GV/910GL Express Chipset fails to work01 Dec 2007 21:56 GMT21
In spite of the "Upgrade Adviser" advising that my system and the
abovementioned display adapter would support AERO AND that an upgraded
display adapter device driver would be available on installing Vista, I see
(1) that I cannot activete the transparency effects (the GUI just ...
Flash Disk Found New Hardware01 Dec 2007 17:46 GMT4
When connecting a flash disk vista won't install it but it's Vista Ready. It
makes the sound of a new connected device but won't find the necesary
drivers. I've installed the hotfix from the vista support mail, but still
nothing. NO flash disks seems to work.
Aero effects stopped on upgrade from beta 2 to RC101 Dec 2007 15:30 GMT3
I installed beta 2 on a laptop with X300 graphics and the Aero UI was working
nicely with transparent glass frames, 3D windows switcher, etc, upgraded to
RC1 and its gone back to basics. I've updated the driver from Windows Update
and still nothing? Why did it change? Have MS ...
"problem ejecting USB mass storage device"01 Dec 2007 13:01 GMT1
i saved a file on my flashdisk then when i tried to 'safely remove hardware',
theres a prompt " problem ejecting USB mass storage device,...try to remove
later",i waited a couple of minutes then tried to remove, same thing prompt
appeared..theres no problem in detecting a device ...
Adaptec 2410SA Raid Contro;;er01 Dec 2007 12:50 GMT1
Let me give a little background to my question.
I have a home built computer that I have used for about 3.5 years. It is
built upon an ABIT IC7-G motherboard, The disc storage controller is an
Adaptec 2410 SA. It has 4 SATA 1.5 gig ports. I have had 4 ea. Seagate 200
While updating Nvidia video drivers Monitor screen  goes blank!!!01 Dec 2007 11:34 GMT14
While updating Nvidia display drivers my screen goes blank while installing
the updated drivers, I uninstall current drivers as Nvidia suggested, Machine
then needs a reboot as I install updated drivers it shows program loading
then screen goes blank! Have Vista 32 bit Ult, Intel ...
Hard Disk Activity after Start/Reboot01 Dec 2007 10:21 GMT7
Each time I turn on or reboot the computer, the hard drive keeps "working"
for several minutes after Vista is loaded. What is happening to cause this
hard disk activity and is it possible to reduce or turn off whatever is
causing it?
Where is my data?01 Dec 2007 05:23 GMT1
I have a 160G Samsung 160JJ HDD that I had been using on my old XP PC.  I
just got a new PC with Vista on it, and it recognizes the HDD but it shows
the drive as empty.  Any ideas?  I have data on that HDD that is very
important, and I don't want to wipe it out and install XP if ...
Need info to install HD01 Dec 2007 02:39 GMT2
I have a spare WD EIDE HD sitting around and would like to stick it into
my HP machine. The C: drive is a SATA. Can I connect my EIDE drive
in-line with the CD drive, which appears to have the same connector? If
so, what do I set the jumpers to on the EIDE drive?
Using two sound cards in Vista01 Dec 2007 02:29 GMT2
I was wondering how to go about having one card playing audio from
windows media player in one room and then windows media center audio
over the other?
Safely remove harware icon possible problem01 Dec 2007 02:29 GMT3
Why does my sata hard drive and DVD Rw show up when I click on Safely remove
Icon. I get the following:
Safely Remove WDC WDC600AJS-00PS SCSI Disk Device  - Drive (C)
Safely Remove OPTIARC DVD RW AD-7173S SCSI CdRom Device  - Drive (D)
Code 10--Generic USB hub01 Dec 2007 02:29 GMT2
My wireless keyboard plugged into a USB port on my main monitor stopped
working.  I plugged it into a USB port on my second monitor and it works fine.
Device manager now has a yellow exclamation mark on a "Generic USB Hub" and
the properties show "The device cannot start.  Code 10 ...
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.