On my network at home I have a wireless router that also has spaces for
regular old LAN. When I plug my laptop into the LAN spot I can use the
internet and connect to the router etc.
When I (try) to use the wireless card, however, I can connect to the network

Have just upgraded my broadband and received a free wireless router. Can
someone tell me what the ethernet port looks like and where it is on my
computer?

Desktop with 3com Etherlink 10/100 PCI NIC; Laptop with Atheros AR 5005G
Wireless Network Adapter.
I only have dialup, no cable or DSL is available to me.
I would like to share the internet connection with the laptop, and also

I ran across Network Magic on the internet and a review of it on CNET (or
Zdnet?). It seems to make networking simple for people who know little about
setting up a network (that's me). I want to set up a simple system-- PC
hardwired with SBC Yahoo! through a 2Wire wireless ...

I run a household with about a dozen nodes including 4 on a wireless AP -
all on staic IP addresses
I just purchased a DELL laptop with XP Pro SP2 and I have no idea HOW to set
the static IP address with the new wireless configuration.

what channels have the least overlap for 2 access points that will be in
close proximity to minimize interference.

When I scan for available networks on my wireless home network via a
wireless router (multimedia modem)
I see 3 networks and the names are all familiar to me because I named them.
Only 1 is WEP protected the others are not.

Yesterday I was told how to combine my dsl modem/router and
linksys router into one network, by turning off dhcp in the
linksys wired router and making it into a passive switch
Today, I've noticed a file sharing oddity

Hi,I have DELL inspiron 6000 with Intel Pro/Wireless 2200 internal wireless
installed. The wireless network connection icon shows that wireless network
is connected. But IE can not browse any web page. I also have DSL and web
browse works fine with DSL connection.

Although I have had a network for sometime, I now have a problem. Although
the network shares the net, and the host computer has access to files on the
client pc, the client pc will not access files on the host pc, I get the
message that I do not have permission to access that pc ...

I have a (God forbid) Macintosh in the building that is hard to get to by
ethernet cable.  It is an older model Imac and therefore has a rather slow
USB 1.x port.  So I installed a D-Link wireless to ethernet bridge.
I want to restrict which devices can connect to my network using ...

I have set up a wireless network with a USR AP and PC card and a CompUSA PC
card in a second notebook. Both work fine as long as I work in a XP admin
account. The network does not come up if I log into a more limited account
first. I must always log into the admin account until ...

hi there.
I cant find the wireless tab on the (wireless network connection menu)
needed to configure a wireless connection . and i read alota stuff on the net
but i still cant fix this thing.

I want to set up a home network using:
- cable modem that connects to 4 port Linksys router that connects to a
4 port DLlink wireless/4port router
- 3 computers plus the DLink are hooked up to the Linksys

hi my wireless zero configuration service is stopped and i cant start it
when i click on start? i get the message
'  Error 1058: the service cannot be started either because it is disabled
or has no enabled devices associated with it'