I've a strange problem trying to associate my device to an SSID
programmatically. I'm working with embedded C++ 4.0 and I have an iPAQ
hx2410. The problem is that when I set the SSID, the other settings
(OID_802_11_INFRASTRUCTURE_MODE,  OID_802_11_AUTHENTICATION_MODE,

My laptop allows me to see other wireless networks in my neighborhood does
when you click "view wireless networks" in the system tray. Is their any
software that would allow me to do this from my desktop PC?  I fiddled with
"Netstumbler" but had difficulty configuring to work ...

I am working with an HP PII 300mhz pc, trying to install a compusa branded
realtek wireless NIC. Another card was installed in another pc for an ad-hoc
connection just fine. Do I have a faulty NIC or problems with the pci of MB.
Note, another NIC is installed, and shows, no ...

Thanks in advance.
I need to connect a device that is designed to communicate with a network
via a wire.  Because of it's location we need to go wireless.  The device
only has an Ethernet connection and not a usb port or slot of any kind.  Is

IF ANYONE CAN HELP ME I WOULD APPRECIATE IT.. I HAVE A LAPTOP THAT I DONT
KNOW IF IT IS WIRELESS CAPAPBLE , COULD ANYONE PLEASE TELL ME HOW I WOULD
FIND OUT,  THANK YOU.....I JUST GOT DSL FOR MY PC AND NEED TO HOOK LAPTOP,
BUT DO NOT KNOW IF I NEED ANYTHING SPECIAL THANK YOU..  ...

Have a few problems while trying to access my wireless router. I have set up
the connection and am having trouble actaully connecting. It says that the
connection is unsecure and would i like to connect any way. i click yes but
this is then repeated.

I have had a lot of trouble but after many steps to getting my network up now
the only way it will let me open or print is to disable my Nortons.  I have
put the addreses in the trusted zone on both computers.  I have followed
previously suggested sites for help and nothing!!!

How do I set up Internet connection sharing on my windows XP pro
computer? I have cable internet connected to a wireless router with 3
computers connected to it using Cat 5 cable. Then My XP pro computer is
on the other side of the house with a wireless network card I also have

I am trying to remove my computer from the LOCAL NETWORK (while still
maintaining an internet connection with my hub).  I have just disabled File
and Printer Sharing through Windows Firewall. However, I still see my PC name
when i click on VIEW WORKGROUP COMPUTERS. How do I ...

I have a small home network, 3 PC's and 2 laptops
The setup is as follows
Host PC running xp pro connected via ethernet cable to wireless router modem
Gateway = 192.168.1.1

I have 2 laptops and a desktop. The desktop is the admin. and has a dlink
wireless connected. All computors have acess to the net but I can not see the
other computors, I have tried different ideas from this newsgroup but no
results. The admin\services \ computor brows changing ...

I have established an internet Gateway on my wireles networ. All is working
well but I can not get Internet Explorer to connect. Firefox connects no
problem. Is there a stting or port or protocal that I need to change or add?

I just recently purchased the all new Toshiba Tecra 4M with integrated
wireless G.  I've found that at both home and work, the wireless drops
every once in a while but more frequently with large amounts of data
transfer, almost as if resetting after a certain amount of traffic.  At

I have a ThinkPad and I use several wireless networks.  How do I find other
resources on a network I use.  (Printers, Other Computers, Availalbe disks
such as those containing pictures or documents.)  
Right now, unless I'm told the names I can't find out what is available.  

I have an aquaintence who will be traveling to Venice from May to June and
needs to know if she needs any special cables and/or adapters to connect to
the Internet. She is checking out dial-up and WiFi connections but is getting
mixed answers on whether or not she needs anything ...