The following wasn't an issue a few weeks ago, but now, if attempting to
connect to another hotspot outside my home, it'll connect, but I can't browse
the internet.  Within IE explorer, it'll say that it is detecting proxy
settings, but that's it; just blank screen.  Even weirder ...

I just recently hooked up a Linksys Wireless router with 4 port-switch (model
# WRT54G). I connected 2 desktop computers via ethernet cable (cat-5) and 1
notebook computer via D-Link Airplus USB Network Adapter to the router. All 3
computers have their internets working perfectly ...

I have two computers at home, each with a 100BASE-T and a wireless NIC. The
wireless NICs are connecting to a broadband router for internet access, and
the 100BASE-T NICs I wish to use for PC-to-PC transfer only.
How do I configure my WinXP desktops to always use the wireless for

Can you point me to any article on how to do it.
Thanks

I have the following home network configuration :
 a.. a Netgear wireless router
 b.. a desktop connected to the router via an Ethernet cable
 c.. two laptops connected to the router via wireless cards

I received a new laptop a few weeks ago and havent had time to check the
wireless. I brought it over to my moms which is wired and wireless. My mom as
can connect with her laptop and my brother is able to connect with his PSP.
The router is a D-Link DI-614+ wireless router. The ...

I recently reactivated an old laptop (had been used for local stuff with no
access to the net). The laptop has XP Home edition and I installed an
Hawkings 54 M 802.11g Wireless Cardbus PC Card in order to establish a
wireless connection to the net. Everything worked fine ...

I recently moved into a new home where it is pre-wired with Cat5 and I get
internet connection thru it.
They have World Wide Packets router/switch( I do not know the difference) it
reads as Lightening Edge 38FSP

recently i had to reinstall wireless drivers, now the window that opened to
show me available wireless networks has changed.  It used to have strength
indicators, was bigger and was entirely more useful.  Now its just part of
the properties box.  Can you tell me how to get it ...

I use windows to connect to a wireless network and so i try to connect to mine.
I enter my wep key as it tells me to do so and then it trys to connect.
After a short time, it says Limited or no connectivity above the icon in the
systray.

My worshipful friend: spend you some precious time.Please read the
following letter.  Our company is a general agency in China.Our main
products are:Notebooks,Digital cameras,Digital video,LCD TV,Mp4
PSP,GPS,Mobile,etc.Our price is the low. The technology of the products

I recently formated my hard drive and reinstalled winxp on my laptop. I
can get into my local network but not on the internet. When I try to
repair the tcp/ip it comes up with "... operation failed: renewing the
ip address and flushing the arp cache. All the other computers on my

Very strange.  I installed a new Linksys network adapter(USB)  with
Speedbooster on my PC.  Works quite well....except that now when I plug into
my USB ports on the front of the PC (ie. my camera), I lose the connection
and cannot repair it and have to restart the puter to get it ...

I am trying to install a DLINK DWL-G510 on an XP system to connect to a
DLINK DI-614+ Router/Access Point.  The G510 installs fine, the drivers
are up to date, the device is working properly but it will not connect
to the AP.  I can swap in an older DWL-520+ and that will work fine.

I posted a message before, but did not get an answer that resolves the
problems.
The configuration: D Link DI-524 wireless router connected to my cable
modem. The network consists of a laser printer with printer server, wired to