| Thread | Last Post | Replies |
|
| Security on a networked ystem. | 31 Oct 2007 23:05 GMT | 2 |
I have two machines in the same house networked to one internet connection, one I use, the other my sons use. Both use Vista. On my machine I have remote access to my work system and obviously some files from that work system that are confidential are stored on my hard
|
| problems setting up corega cg-wlbargp wireless router | 31 Oct 2007 19:12 GMT | 5 |
Hope you can help. I am having a problem with a corega wlbargp wireless router, we got given it, we didn't know the password for setting up( i did try username: root password: <blank> ) didn't work so i thought someone had changed the username/password. found the manual on the net ...
|
| inconsistent wireless signal | 31 Oct 2007 16:24 GMT | 3 |
I have a desktop with a Linksys WMP54G wireless PCI adapter, and a laptop using Atheros AR5005G wireless network adapter. Both machines sitting next to each other. My laptop connected to my home wireless network about 2 hours ago and has consistent signal, not once did it drop ...
|
| wireless together with cabel | 31 Oct 2007 16:22 GMT | 1 |
when i connected my router with wireless computers and cabel computers. its ok but then i adjust security mode wpa or wep for wireless conecctions on routers. my wireless computers connected but i couldnt connect it on windows clients. must I write the wpa password when my cabel ...
|
| How do I configure 1 iMac & 1 PC | 31 Oct 2007 16:19 GMT | 1 |
I have an iMac G5 connected directly to the internet with a Cat5 cable. I would like to connect my PC Laptop to the internet via my iMac through a shared wireless network using the iMac´s Airport Extreme, I am usingWindows XP2 Home. I have tried with no joy and close to giving ...
|
| 2 wireless devices (router, access point).. if both on Remote desktop pauses every few minutes.. | 31 Oct 2007 16:18 GMT | 1 |
I have a dlink N1 router.. the wireless is set to a different channel than the other device.. it is in N mode only right now too.. I also have a dlink G700AP, access point, sitting ontop of that guy.. providing B/G access to my place..
|
| wireless printing | 31 Oct 2007 16:12 GMT | 1 |
how can I get my home laptop to print in my wireless network connection?
|
| HELP | 30 Oct 2007 16:19 GMT | 3 |
I just installed windows xp on my computer. I can not access the internet. My local connection can not find a physical address, default gateway, or dns address. Why?
|
| cannot identify network | 30 Oct 2007 04:50 GMT | 2 |
Im running windows vista in my dorm room and i had a wireless network set up when i first got here. But then i had to take it down when i found out that it was against network policy. I then plugged my cable into the jack that the router was connected to and it says it cannot ...
|
| wireless networking | 29 Oct 2007 16:42 GMT | 2 |
My desk top running XP is hardwired to Linksys wireless adapter and cable modem. My laptop is wireless. I can connect to internet and to laptop with desktop. I can connect to internet with laptop but not to desktop. I want to share printer that is hardwired to desktop. Have ...
|
| Searching for Wifi Network in XP | 29 Oct 2007 16:42 GMT | 3 |
I am trying to 'find' my LAN network and as I have never done this before consulted the XP Help and Support. The instruction starts as follows: =================================
|
| Can't maintain wireless connection. | 29 Oct 2007 16:40 GMT | 2 |
I recently installed a Linksys WRT54G wireless router to my satellite broadband service to connect my other desktop and my notebook. I installed a Linksys WMP54G PCI adapter to the 2nd desktop. After everything was configured, I can receive and connect to the signal, but the ...
|
| HELP D-Link 604T wireless routers | 29 Oct 2007 04:12 GMT | 2 |
I have an D-Linl G604T wirelsee router and I cant share files or printers. I have done all the things am tould to do asto sharing and home networking or does that aply to LAN cards hooked up together. How can I get them to share files and printers ?
|
| Two machine connection. | 28 Oct 2007 23:45 GMT | 5 |
Firstly I have to admit to knowing little or nothing about networking, however I have a broadband connection via NTL cable in the UK connected to two machines both running Vista. One is connected by an ethernet cable, the other via a Netgear wireless
|
| wired and wireless access point | 28 Oct 2007 19:04 GMT | 4 |
I created/have a wired network with my main win xp pc wired from my router and a second wire from the router that I plug my laptops into (pc and iMac laptops). I recently was given a cisco airnet 350 wireless access point and a cisco
|