The Windows XP Home computer in my living room is connected by Ethernet
cable to my D-Link DI-524 wireless router, my access point, which is
connected to my Motorola SB5120 cable modem. The WinXP Home system in my
office has a D-Link wireless PCI card, and the Win2000 Pro system ...

When I un-plug ethernet cable from the PC with Vista and
plug-into the PC with XP, it says, .... Unplug Cable, although
the Cable is firmly plugged into the Ethernet Port.  
One thing I noticed is that green/orange light did not light-up, hence

A friend is getting a new laptop with XP and wireless router and asked me to
set it up wireless which I can do.  He will be shipping the laptop to his
daughter in Atlanta.  My question is:  Can I still set up the SSID and the
run the router setup with everything left in tact when ...

I recently successfully set-up a Linksys WRT54g Wireless-G router with
4-ethernet wired ports. Currently, I only have one computer, and when
it is in the office with the router, I have the ethernet wired
connection hooked up on the computer and the wireless connection is

Changed the default channel to SEVEN but when my remote node is used
to scan for local networks it looks like both SIX _and_ SEVEN are
showing up.
The built in web based config screens don't show SIX as being

I have installed the above Wireless adapter on my PC which is Gateway G6-350
- running Windows 98 SE.
Problem is - when I click on the 3COM icon (which I have placed on my
desktop) - it opens only for about two seconds and then closes again. No

Tenn Station On My Wireless Router.  Wireless BellSouth DSL
1 or 2 times per week I hear a radio or TV station in my PC spealkers.  All
programs are closed.  I have a Wireless Modem / Router with Wireless
BellSouth DSL.  I also have a 2nd wireless USR Router connected to the 1st

A neighbouring business has a wireless network which our computers
repeatedly attempt to connect to even though it is not in the preferred
list.
We do want users to connect to non preferred networks but to specifically

I have a desktop and a laptop, both running XP and up to date with XP
updates.  I want set up a wireless network using a flashdrive.  I have a
wireless adsl gateway (acts as the modem and wireless router).  But there is
no usb port to plug in the flash drive.  Can I start the ...

Hi ... I am using a Linksys router and I am curious for wireless as to which
is a more secure setting . Here are the options I see >> WEP , WPA and WPA2
Also if anyone could explain what this setting is for and were should I set
mine at >> WPA Alogorithms >>> TKIP or AES

Here's my setup in my office/internet cafe.
I have 2 ISP's ( we need redundancy here ) each one connected via ADSL
modem/routers.
One router configured on our LAN with ip 192.168.0.250 and the other one

i have done my best searching "wireless networking", but couldn't find a
basic thread explaining setting up an ap.  So if there is a place, please
point me to it.
i have D-Link router, and a Vikosmo access point.....i followed the ap

I have set up a home wireless network with a desktop (running XP Pro) and 3
laptops (2 x XP Home & 1 x Vista Home Premium). All machines can "see" each
other and able to access every other PC on the network, except: None of the
laptops can explore the desktop. All come up with ...

I am using XP Pro SP2 and a ZyXEL Prestige 660HW-T1 Modem/Router.
I am also using Network Magic which compensates my lack of understanding on
networking in general.
For the last couple of months my wireless connection disconnects and

Here's a head scratcher:
We've got three Cisco Aironet AP's connected to a Cisco managed switch
and everything was working fine until someone brought their iPhone and
Mac in.  When they turn them on, the other wireless clients get the "there