A laptop with a wired ethernet NIC and a wireless NIC.
The Wired NIC get its IP from a DHCP server.
The wireless NIC also get its IP address from a DHCP server.
When only one of the NICs is active, everything works fine (wireless or

I am using wirelss...Every network i connect to says limited or no
connectivity.I try to use internet explorer but it says windows cannot be
displayed...so the limited or no connectivity cant be a false message.i cant
even get onto the internet.Is it my computer thats not working ...

I am involved in mass rollout and re-imaging of PC's as and when required.
Once the PC is added into the domain (all an automated process), I would
like to use GPO to rollout wireless setting including WEP password, is this
possible or is there an alternative I can use, such as a ...

I get the limited or no connectivity message with the reason as above. I have  
good signal, setup looks good and i have been through Ezlan. My other laptop
connects OK and the setup appears  identical. Running XP pro.

I recently upgraded my Dell Optiplex GX620 to Vista OS.  My H-P Deskjet 6840
printer "lost' its connection with the computer.  (It worked wirelessly
before the upgrade from Windows XP.)  The printer returns an IP address:
169.254.211.9; the Wanadoo (France Telecom) LiveBox router ...

I am trying to connect to a wireless printer (HP 6980). Printer is talking to
the wireless router (Linksys WRT54G) just fine as my husband can print over
our wireless network from his Macintosh laptop. I cannot install the printer
on my Win XP machine - cannot even see the ...

Hello, I currently have a wired lan using a cable modem and nat router (US
Robotics 8003) to connect two desktops. I want to add wireless access for
laptop upstairs. Question; do I need to add a "switch" between the router
and the wireless ap or can I just plug the ap directly ...

Dell Insipiron w/dell 1390 Wireless mini-card.  Works fine when hook it up
with 45 hard wire connecter to my Netgear mr814v2 router.  But, no luck
using it wireless.  In the Windows Mobility Center it shows "Wireless off".
The "turn wireless on" button is greyed out, I can't turn ...

Background - I have a XP MCE pc with a dlink wireless PCI card that access my
router. On this same pc I have a Playstation connected via cat5. I've bridged
the wireless and LAN ports so that both PC and PS2 get online via the dlink.
New problem - I wish to get my N95 to access the ...

I am using a setup like this:
----------- USB cable  |------------|

------------           |Bridge      |

I have a cable modem and a wireless router hooked up to my computer.  The
router is used to broadcast a signal to my wife's computer.  Lately I have
been plagued by dropped signals.  I am able to recover the signal by turning
off the router and then turning it on again and having ...

I want to get a high gain directional wlan antenna and I was thinking about a Cisco
AIR-ANT3338 solid dish - they're pricey but I expect excellence from Cisco. I've also
seen these grid antennas about which are a fraction of the price and yet advertise the
same gain levels. Is there ...

I ran into a problem while trying to install a new version of VMWARE.
The install crashed and somehow both my ethernet connection and the
wireless connection was removed from the "Network Connections" page.
To re-add my ethernet connection, I unistalled the driver for the

I was asking if I can and how I can drop the connection of a apecific client
in MY LOCAL network (e.g. a wifi network).
I know his fixed IP (e.g. 192.168.1.103); maybe I have to do a DoS attack,
can someone suggest how or a software doing so?

I have both a wired Ethernet and a wireless access onto the same
router.  It seems that my XP Pro defaults to the wireless adapter for
my network access.  How could I set up the network metrics so that my
wired network adapter will the priority access?