I have WinXP Home SP1 with the USB update downloaded and installed.  My
problem is that the USB2 ports don't work.  In fact, they upload data at
around .50Mbit/s (when they work at all) compared to the 6.0+Mbit/s I'm
getting on USB1.1.  I have an MSI KT3 Ultra-ARU motherboard with ...

My Dell 8100 Dimension system will not come out of
Standby when the mouse or keyboard is used.  MS website
says SP1/SP1a addresses this problem, but SP1 is already
installed.  MS website also gives version information on

I HAVE WINDOWS XP(HOME), WHEN I INSTALLED IT MY MODEM
(HSP56 MICROMODEM)& SOUND CARD(C MEDIA PCI AUDIO) DOES NOT
OPERATE, IS THERE ANYWAY I CAN FIX THESE PROBLEM

i just installed a new motherboard and windows XP wont
start propperly now? any help?

Could someone please help me, my computer wont start up
saying that there is a fatal error so im trying to format
my hard drive and put windows back on.Im using the
recovery console and I do this but it doesnt work:-

i have just tried to install a second dvd writer as i
have been given one that was no longer required they are
both matshita sw 9581 drives and no matter what i do i
can't get xp to recognise the new drive as a dvd writer

I have a new Maxtor 200 gig harddrive and am running XP
with all the updates and the bios recognizes the drive as
the slave, I can partition it and format it but everytime
I boot the machine the little bubble in the bottom right

I have added a LG combo drive GSA 4040B and Moviemaker does not allow me to copy to drive!
Have read the help and do not have a recording tab.
"Open My Computer>CD-ROM Drive in question, right click Properties>Recording
Enable CD Recording on the drive."

my motherboard has infrared on it, i have install the
cable and it shows as working in control panel.
when i put the phone in front of the computer a icon
appears on the taskbar so i know it works.

No postings since 01/22/2004

When I put a floppy in the drive, the CPU makes a repetitive skipping noise when I attempt to open files on the disc.
I then get an error that computer can't read drive a. When I checked the hardware in devise manager it tells me the devise is working properly, and a ran the new ...

I'm trying to install windows XP professional on a Raid 0 array, the problem is I dont have a floppy drive, is there anyway I can get the raid drivers during installation without using a floppy drive?  I haven’t used a floppy drive for the past 3 years and I hate to ge one just ...

Could someone give a short procedure please on how to do this?
Thank you in advance

123456789

I've been running a clean install of XP Pro on an Athlon 950 system
for about a year. Upgraded mobo to ASUS A7N8X-X with Athlon XP 2800
chip and 256mb of PC3200 DDR. But when I started it up, I got the
dreaded "ntldr is missing" message. Have tried all the Microsoft KB