I cannot open the CD drive door.  When I press the button nothing happens.  The DVD drive works perfectly and the status of the drive on the computer is good.  The green light is on continuously too if that helps.
Can you open the door manually without harming the exterior of the ...

Windows XP could not start after installing new hardware.
thank you!

when start-up windows ,found new hardware keeps popping up
after I already installed new driver on win xp. How do I
stop this?

I can't get this stinking 1 day old scanner to work. HP has no customer
support that is of any worth, and of course MS will not help, why should
they. Is there a gentle person out here that has any thoughts on how to fix
the problem, or what software to buy to make it work. ...

I'll try to make this as short as possible :-
Just assembled a brand new system with a Shuttle AN35N-400 mainboard, running WinXP Pro, with 6 USB ports.  All system parts are brand new out of the box & purchased from the same vendor.  The Shuttle documentation & website states to ...

Got alot of these errors in the log.
Details
Product: Windows Operating System
ID: 51

Hell
I though I would post this just in case it will save someone from the several days of insanity I suffered this week
If your XP HDD misteriously refuses to boot after a restart and you have done everything you can think of to resue it, if you have Norton Ghost installed on the ...

Hi all, I've just installed a FM/TV tuner.
Loaded all the drivers (it works fine), BUT it keeps
on trying to load a capture device (which I dont need).
And it keeps on bringing up code 10. I've rebooted 3-4 times to try and fix

Rich,
Thanks for the tip on this problem. You suggested removing
Speed Disk and see what WinXP would report. (Original
messages below)

Hello My friend asked me to look at his computer which is
a 450 mhz AMD system. For some reason the computer just
shuts down and reboots. Some times when it reboots it
fails to find a bootlog. and can not reboot. It seems to

My computer (windows XP pro) believes that my 3rd HD is only 128G, though in reality it is a 250G drive. I have a promise controller that is functioning properly, i know this because it is able to read my 2nd HD (of 200G) properly. My 3rd HD used to be recgonized properly, but ...

My drive just crashed, and I need to get a few very important files out of the My Documents folder, but I can't access it just by plugging the drive into another PC as a slave, since I don't have the 'permission' to access the My Documents folder - any way around this?
I've pretty ...

When I install my new hard drive, windows can only
recognice 131 Gb out of the 160 Gb. How do I make windows
recognice all 160 Gb of my hard drive?

Just ran into this.
I had two flash drives plugged into USB ports this evening and was
copying data off of them.
99% sure this is how it happened:

windows XP could not start and keep rebooting after
intalling the hardrve on another computer.
thank you!