What's the difference between a PS/2 and USB mouse?
I had to install Intellimouse with PS/2 connector, and I cannot change it to
USB.
Is it worth trying to connect USB? Mouse together with the printer  2 will

I have 2 removable flash drives which do not show up when I check "my
computer".
There's also a USB extension which is not recognized by XP pro.
All 3 work well on another computer.

MSI 865PE Motherboard with 8 USB ports [6 rear ports on Motherboard and  2
on  front of case] . Hardware Device Manager is showing 4 USB Host
controllers [Non -enhanced] and a fifth controller as USB2 Enhanced Host
Controller.

I am trying to add a CD/RW Drive to my computer. I already have a CD ROM drive. When I install XP won't recognize both drives. But it will recognize them if they are intalled by themselves. But when you hook up both xp only sees one. Can someone help me.
Thanks in advance
Tony

Unfortunately my printer manufacturer (Samsung) does not
offer an XP driver. The printer installed from the
Samsung software & runs perfectkly.
Every time I start Windowsit detects "new hardware"

I recently installd a new hard drive and windows
installed my hard drive a G:.  I need to change that
designation in order to install a few programs that have
an unchangeable install folder of c:.  windows set a

I'm having trouble using a USB 2.0 video capture device.  
When I plug in the device Windows says "HI-SPEED USB
Device Plugged into non HI-SPEED USB Hub".  After reading
Microsoft's Knowledge Base on this issue I checked Windows

In XP I can't seem to find a setting that disables a
modem from answering incoming calls.
I wish for the modem to dial out only

i am having the same problem as the following person. My
version of xp pro is an oem version.  I need help with
this since I have had the system less than a year.  
Subject:  Dvd and Cdr Drive Problems And Reinstalling

I have a person who is poor folks and cannot afford a new
computer and I am updating an older one for them.
It has 98se and I am adding a 80g hardrive because the
one in the computer is bad.  Also updating the memory to

I have a medion , microstar and upgraded to a new mother
board (MSI-as before), and new chip P4 2.66 Ghz.
I just cannot get the damn thing to see hte cd drive at
all. it either my one hard drive and dvd player or

Is there anybody out there who can help me remove the
error messages,the program does not seem to completely  
load and the (Found new hardwarewizard keeps coming up)

I installed Windows XP.. now, everytime I restart I get a
message about the PCI Simple Communication Controller.  I
go to device manager and it can't find it.  I think this
is refering to a modem (not sure).  I use a cable modem

I have recently purchased and installed an ASRock K7S8X
mobo with an AMD 2600 barton processor and 256mb ram.
To cut a *very* long story short, I had endless problems
installing xp culminating in the installation failing with

I have a refurbed PC with nothing installed
I want to install XP but when i turn the pc on it just
goes to the c:\ prompt
Do i need to install MS DOS first?