I have recently installed a geforce3 ti 200 onto my Asus motherboard and XP is not liking it.  When I uninstall the drivers, I can boot to XP fine, then I reinstall the drivers and windows locks up on the boot screen.  Tried to reinstall XP and now I'm stuck in a loop.  When the ...

I got a new computer system an unable to get my hp 3200c
scanjet scanner to work with my windows xp. I have
ordered the cd updated driver but still doesn't work. I
get the message: open fail  PPSCAN.VXD along with an

I recently got a Lexar USB Jumpdrive. This unit works
great on my home system. Once plugged into the USB hub
Windows Explorer sees it as a LEXAR JUMPDRIVE in the
drive pane. My notebook is another story. Once the drive

recently i have been experiencing some wacky bugs, and
nobody seems to know anything about them.  the most
prominent bug is a problem with window sizing.  for some
reason windows dont open to the correct size, or will not

I have a satelite 2400 laptop running on Windows XP I have
only used the floppy disk drive a few times. Now when I go
to use it, no matter what disk I insert, it tells me the
disk is not formatted. I can use the disk in other

I am trying to find the link to the file:
Q817357_wxp_sp2_x86_enu.exe. It will allow my Windows Xp
to autorun again. A program i ran before, disabled the
autorun option.

I ahd a bad NIC card, and have had a new system board
installed.  (Sony Vaio with an intergrated NIC)  I know
there are difficulties with new hardware and XP.  I have
deleted and readded the card, doesn't fix it.

Alister,
Perhaps a question for an XP news group, but...
If you are referring to the bios option where you can set a time of day for
the system to boot, then this should work regardless of the OS installed

After loading all the correct software I keep getting an
A10. exe message and PC keeps showing the box Preparing
Lemark AIO for first use and just keeps searching with no
result.

I uninstalled the CD-DVD drive and deleted it by mistake.
I tried to load the hardware again by following
instruction given in install hardware. But it's not
working out. It shows error 41.

Help!! I built a new XP system not too long ago. Worked
good. Then my wifes power box went out on her computer so
I took my Hard drive out and put her HD in my new system.
When she go a new power box I took her HD out and

I am at my friend's house and his computer shows both his
cdroms on Device Manager as not installed.  I get this
error message:
Windows cannot start this hardware device because its

 I am having problem with my D drive ( dvd rom) which
has suddenly disappeared from my computer menu and
 is not detected by any applications either.My Antivirus
program (NAV 2003)did not detect any virus in

I've read the instructions to fix this problem at this
link:
http://support.microsoft.com/default.aspx?scid=kb;en-
us;314060

I had windows xp installed on my 40gb wd hard drive with
my 200gb maxtor running backup.  This was on a ECS L4S8A2
motherboard.  Windows was giving me problems and i tried
everything to fix it but it would not stop freezing.  I