Changing the CMOS battery on a motherboard has reset all
the screen setting on the computer back to the original
ones.  This is OK as they can be changed back to the
setting I want.  However, when I try to change the screen

Hi everyone, nice to meet you all :
Im getting an error message and blue screen of death on the bootup of XP Professional, the error is
STOP: 0x0000007B (0xFD583640, 0xc0000034, 0x00000000, 0x00000000
Check for Viruses, remove and newly installed hard drives or hard disk controllers ...

I have a new Toshiba Portege 2000, running XP
Professional.  I have just connected an external iomega
CD-RW/DVD-ROM drive to the laptop.  Initially the device
worked, then I received the message that the device could

How many hard drives will windows XP Pro support??  I am
going to have (9) SCSI3 drives and (2) IDE drives plus 3
CD-ROMS. So thats 14 drives total, with a possible 2 more
SATA drives in the future,  will windows xp pro be able to

My hard drive is not completely formated leaving a lot of
unused megs.  How can I format and partition the
remaining volume for usage.  80gig using only 2gigs

After upgrading my cpu from p3-800mhz to amd xp 2400+,
windows couldn't load because of a hardware change.  
Reading suggestions, I did a repair installation.  After
this, during bootup, I see the winxp logo screen, and

I moved my XP Pro from a SCSI 9.1Gb to the first part of an IDE 60Gb and since
the system is painfully slow, the second part of the 60Gb is for my D: drive
which house all my applications.
What could I do to get XP to a more normal speed, I know that an IDE drive

I am a complete novice with no clue as to how to fix my
problem.  I boot up my computer and Xp appears to go
through the motions and bam!! I get a blue screen stating
that there is an unmountable__boot__volume error.  Last

i am trying to install windows wp in my external usb hard
drive. and at the same time keeping my windows 2000
operating system in my c drive.
"My conputer" shows my extenal hard drive as "F". When i

If I put 512mb memory (pc3200) along with the original
512mb (pc2700) will it be any faster?  Please advise and TIA.
shaka

Can I stop XP from re-installing a NIC after I delete the drivers?
I have a number of PCs with dual NICs, a Broadcom NetXtreme on the
motherboard,
and an Intel Pro/1000 NIC in a PCI slot.  Unfortunately, Ghost doesn't like

trying to install new master hd (wd) 160 gb used power quest drive image copied master image to 160 gb slave from  master after imaging swapped with master changed jumpers win xp logo displays then blue screen before desk top loads then computer freezes any help would be ...

Does anyone know of a way to make an abit KG-7 Raid
motherboard work with anything but kingston ram? So far i
have only gotten one stick of 128M to work i have 2 other
sticks of 128 and one stick of 512 and i cant get any of

How can I erase all knowledge of both SCSI and IDE CD/DVD-ROMs and
Writers to give the hardware detection a clean slate to work from?
Just deleting them all in Device Manager doesn't seem to fix things.
--

Here is my problem, i have an on board lan card wich is Fast Ethernet VIA PCI 10/100 Mb
I don't want to use it but when i try to remove it, i can't it only gives me the Uninstall and Deactivate options, and when i do the Uninstallation, it won't work because when i reboot my PC ...