| Thread | Last Post | Replies |
|
| What is a safe temp for you CPU to be at? | 23 Jan 2005 13:42 GMT | 10 |
I'm not sure what are a good range of temps.
|
| new Hard drive | 23 Jan 2005 09:37 GMT | 3 |
I just install a new hard drive..Seagate 200gb....how do you format this harddrive...as when i did it...it turn into a dynamic disk....unable to make partition in this harddrive...is there nay programs to format new hard disks....thanks
|
| install an extra hard drive | 23 Jan 2005 08:47 GMT | 3 |
i hav a 80 gig hard drive from a previous computer that was a storage drive only. i would like to install it on my new computer as a storage drive only. if i use the ribbon cable i used on the old computer,betweeen the two
|
| Lexmark X73 Problem | 23 Jan 2005 05:43 GMT | 8 |
A friend of mine is having problems using his printer since he has upgraded from WINME to WINXP. Since then, at first, his printer took a long time to start printing. Now it won't print at all unless you reinstall the drivers every time you use it. also when he unplugges his
|
| Linksys USB10T on Windows XP | 23 Jan 2005 03:52 GMT | 1 |
I have this device working under Linux, but when I boot to Windows XP (same machine, same device, etc...) the device and network seem to be present and configured properly, but only sent packets seem to be seen - no receive
|
| HDD Swapping Woes = ( | 23 Jan 2005 03:33 GMT | 9 |
Thank you in advance for the assistance. I posted this elsewhere prior to seeing this section. Sorry about that. I am currently going insane as I have a soon to be dead WD 120 GB HD and I received a replacement one from WD. Now before I send the defective one back to WD, I am ...
|
| No More CD-R's for Me | 23 Jan 2005 03:17 GMT | 6 |
I have xp home on an [adjective] ___ pre-install hp pavilion a300n. ASUS CD-R/W drive no longer will read most CD-R's or burn them. For some reason, CD-RW's are still fine. Yes, I tried a few different brands and no luck.
|
| BIOS driver | 23 Jan 2005 03:16 GMT | 2 |
1. I right click on "My Computer" 2. Click on Properties 3. Go to Hardware 4. Click on Device Manager
|
| USB2 HDD dropouts in recognition | 23 Jan 2005 03:01 GMT | 4 |
External HDD connected by USB2. The drive sometimes needs to be switched on and off a few times before it spins up. Sometimes even after it spins up it is not recognised and needs switching on and off several times. Sometimes it will spin down while it is being used and then spin up ...
|
| Access to my slave drive | 23 Jan 2005 01:24 GMT | 14 |
On my very old PC I had a 20GB Seagate hard drive, which I upgraded from Win98 to WinXP Profesional. The upgrade went well. The hard drive was partitioned into two 10GB sections because the motherboard would not allow the entire the entire 20GB to be formatted (that's what the ...
|
| What are the advanges of dynamic drives. | 23 Jan 2005 00:17 GMT | 5 |
I have read a few things about dynamic drives and it seems a very atractive feature. However I would be very thankfull if someone could give me some suggestions on aplying dinamic drives to a 2 x 80 GB IDE HDD PC. I was thinking splitting multiple partitions between the 2 drives, ...
|
| shut down icon missing | 22 Jan 2005 18:03 GMT | 2 |
when I log into my computer on one of my administrator screen names my shutdown icon does not show up when I press click on start , only the logoff icon shows. How do I get the shutdown icon to show again or what can I do?
|
| How Fast is USB 2.0? | 22 Jan 2005 15:12 GMT | 12 |
I have an external USB 2.0 enclosure hooking directly to USB port on my Dell PC. The speed when I transfer files b/w the external drive and the PC is not as I expected. It takes more than 30 minutes to transfer 4GB of data. Is this accepted for a USB connection? The external ...
|
| cooling and electric | 22 Jan 2005 12:15 GMT | 4 |
I m about to go to the pc area and treat myself...I would really like to get NEW FANS because there a unbearable noise(beleve me)and it's been a lot hotter lately! how do i know what to buy? where to get the info i need to choose the
|
| USB mass storage flicky on WinXP home | 22 Jan 2005 04:49 GMT | 1 |
I have recently bought a mp3 player, which is a USB (1.1) mass storage. I tried plugged it into a WinXP home machine (SP2), and Win prompts for driver (which is strange). On that same XP home machine, I have another USB (2.0) mass storage installed with no problem. To rule out
|