I'm having the same problem with my XP Pro puter, the same message on the
monitor that there is no signal.  When I boot up, all lights come on as
usual, sounds as if the HD is spinning, all the usual sounds.  Prior to this,
there were beeps indicating a video problem, so I ...

Just installed a 2nd hard drive to my system but everytime windows starts I
get an error message... 'disk drive has not passed windows logo testing to
veify it's compatibility with windows xp'  The drive is recognised in My
Computer and as far as I'm aware it has no O/S.  If I ...

How to I change my old Maxor HD from a Master to Slave. I bought a new master
HD but the old HD takes over as Master no matter how jumbers or cables are
set up.  I don't want to lose the data on the old HD. I use XP Professional.
Please reply to --tomshare@yahoo.com

So at my work right now, I have need to cable up from my laptop
direcetly to hardware which requires a DB9 style serial connection,
through which I update some firmware as part of development software
release cycles.

Help!  For some reason, my cd-rw and cd-rom stopped being
recongnized in My Computer.  Checked Device Manager.  
Devices show up, but when checking properties, I receive
this message:  "Windows cannot start this hardware device

I have a new intelliMouse Explorer 4.0A. I have installed the latest
intellipoint 5.2 drivers, but the wheel wont scroll at all. All other
functions are fine.
If I use it on another pc even without drivers it's fine. I've tried

I am trying to help my daughter fix her computer.  It will boot up, but
there will be one long high pitched beep then two short ones, a few
seconds later there will be 2 low pitched beeps.  There is nothing on
monitor.

I own a NEC DVD RW 2500A, and it can play DVDs fine, but when I enter a DVD
R into the machine, it XP changes it from DVD RW drive to a CD drive, and
Nero cannot write to it, as it states it needs a DVD R or DVD RW.
I am using Packer Bell DVD-R s 4.7GB 4x.

Dear all, I want to add a new hard drive but the new drive is not showing in
explorer:
Set up is 1 hard disk and 2 partitions C: & D:
Also I have a CD R+W E: and a DVD R+W F:

Now that this has happened to two consecutive hard drives, I'm
becoming really paranoid...
Short story version: I use XP (SP2) Disk Management to format a WD
180GB ATA drive as a single NTFS partition using 64K clusters (for

When I start-up my friends computer, he gets a message that says: A problem
has been detected and windows has been shut down to prevent damage to your
computer.  A process or thread crucial to system operation has unexpectedly
exited or been terminated.  If this is the first time ...

I am afraid I have burn my hard disk, I got the following error message:
something like : "Disk boot failure. Insert system disk, and press enter"
The BIOS still able to recognize my harddisk, but when I use other hard disk
to try to retrieve data from my faulty harddisk, it just ...

What happen is that when I turn on my computer all it displays a "No
Signal" It looks like there is not a video response from the computer. I
posted this question before and someone ask me if the system come on, also if
the fans are running, and if the LEDs of the motherboard lit ...

I have sound coming out of my speakers from Cds and music stored on my pc,
however I cannot hear any system noises or when I access the internet and
view any video footage I cannot hear it.  Is there a simple answer?  I have
tested the dxdiag and it all works fine and my driver ...

I open up my computer and only shows one hard drive. (I have 2).
It shows both at startup.
How do I get it to show the other drive.
In the managament section I can see the drive but not on My computer.