Windows XP assigns a number to my PC's network adapter after the device
driver is updated or when Windows detects the hardware adapter as a "new
device" after previous drivers are removed from the system cache folder.
This problem occurred after I had installed updated device ...

Each time i restart the pc, it appear the ballong that is says, found new
hardware printer, the problems is that the printer is already installed and
it prints. Also appear with the cable of the printer plugged and unpluged. I
Went to microsoft.com and appeara solution that a had ...

Please, can you advise how to solve the following problem?
My notebook HP Presario 2100 is one year old, however I don't run it on
batteries often. If, it was wrking for almost 3 hours long. I have both my
desktop PC and notebook powered from the same AC outlet. 3 days ago my PC's ...

I have three Maxtor HD drives attached to me recently re-arranged system:
C: is 80Gig with only system and program files; Primary Master
( D and E are CD)
F: is a 300Gig Maxtor internal for storage of data, mostly jpg files.

Is there a way to clean off old information for the XP updates?  It seems
like there are old files that are saved, is it possible to remove these files
to create hard drive space?  What is the method?
Thanks.

The problem is whenever i click right click mouse button on the desktop the
screen refreshes itself and sometimes shows me this message below-
explorer.exe- Application Error. The instruction at "08101302c8" referenced
memory at "080000000".The memory could not be written.

In booting from a CD is it possible to Flash a Bios?......I have an Asus
board and want to update the bios but I dont use a floppy anymore so could I
just make a bootable CD and then add the AFLASH.EXE and the BIOS .ROM file
to the CD........Just wandering ?....I think this would ...

Auch ich habe ein Code 38:
Mein USB-Scanner lief alleine klaglos,
doch als ich vor Kurzem noch eine Canon IXUS 500 über USB ansteuern
wollte, hat das nicht gefunzt. Im Gerätemanager habe ich dann das

I have a computer that when you attempt to print to a printer set to "Spool
print documents so program finishes printing faster" it fails if the print
job is greater than 9 pages in length.  When it fails the printer never acts
like it even receives a signal from the computer so ...

Windows XP Home (SP1)
I originally had and still have a 15 GB HD, using NTFS,
which had the OS and everything else on it.
I just installed a Maxtor 80 GB DiamondMax Plus 9 Model 6Y080P0 ,which

I am having a problem getting my mouse to load in safe mode. The drivers for this mouse are up to date.
I am running WindowsXP with all of the updates. The label on the underside of the mouse reads "Intellimouse 1.1A Serial Compatible Microsoft Corporation". Aida identifies the ...

Suddenly my Sony 710A will not recognize CDs.  It recognizes, plays and
records to DVDs with no problems.  I have the latest firmware (BY02) and
even installed a new cable to no avail.  The unit is still under warranty
and I suspect I will have to return it but I thought I would ...

I hope I have the right newsgroup
when I add a new device and reboot an XP machine, plug and play detects the
new device and installs the driver.  However, when the machine is on an
isolated subnet, that process seems to take much longer.  If i unplug the

120gb drive on 1st IDE channel  set as Cable select & dvd writer on 2nd IDE
channel set as CS. Fitting 2nd  120GB HD   degrades Ist HD down to 16mbit/sec
from 25mbit/sec  & the new HD to 3mbit/sec( similar result using CS on both
or Master/slave config). Similar results on second ...

I have a Creative Audigy2 installed on my computer. I installed an
application on my computer that seemed to interupt my settings. I have since
removed that application, but my sound card now only plays through the
headphone output. It is indentified by my computer as "EMU 10k" ...