Any time I connect any USB device to my running computer all USB devices stop
working. Device manager says they are all working fine. Rebooting computer
fixes problem. All such devices work fine if they are connected and then I
reboot computer. I first noticed this after ...

I ave a pannasonic toughbook running xp pro sp1.  I added a pannasonic
dvd-rom.(plugged into a drive bay not usb)
The problem is...when I open 'my compute'r the dvd-rom icon is there but
when I double click it, the window opens but shows nothing in it.  I know

i have a creative vibra 128 sound card. the hardware was working fin
untill just recently.when my computer crashed from a program install.
ever since then i have no audio device. even though the sound car
under device manager is listed and said to be working.

HOw do i find out if my computer contains a sound card. I seem to have
problems recording, even though i have a microphone. I've tried plugging it
into the line in on my screen and mic socket on the system unit, and there's
nothing being picked up.

Hi;
When i press the power button, sometimes I have to wait for few minutes,
then my computer startrting to work, or  and sometimes i push the power
button nothing happen. It this hardware issue or software? thanks for any

My friend gave me his old Windows 95 computer and there wasn't anything I
thought I could use (or even looked salvageable) except for this Nex CDR-251
4 CD-Changer. However, once I put it in my Windows XP Pro computer, it
detects it but not as a "4 CD-Changer." On the Windows 95 ...

I no longer have this problem and I want to ask if it might be because I am
using SpeedFan to up the fan speed to 100%.
I bought an HP in January of 2004 and within 2 or 3 months my HD began
making a terrible racket and acted like it couldnt find anything so I ran

I hope someone knows the answer to this and that it isnt as bad as I think
it might be.
I have 2 optical drives a CD-ROM and a DVD writer and CD-RW combo, every
once in a while one or the other will become unaccessable for no apparent

Reloaded xp home last night and everything seemed ok but all I get now after
boot up is the above message and black screen..Its possible I loaded the
wrong drivers for Ati rage graphics card as I did not have the original disk
so I found drivers at Drivers .com.Any ideas pls?

 When i try to boot my pc  the pc starts  but it dosen't do the final click
sound before the monitor lights up  and the light on the front  just stays
light and dosen't blink  like it normally does. I also noticed the the temp
of the CPU is running alot cooler (I have a EXOS ...

Am using my Canon with the included Remote Capture software with good
results.  Have pretty much total control over camera with just a USB
cable connection.
However would like to use this software outside near my bird feeder to

Hi there. My CD-RW drive suddenly stopped reading any discs. The system
recognizes the drive and says it is working properly and that the drive is
"empty".
I checked for driver updates, but have the most recent one. I did uninstall

I dont know the exact error but every once in awhile I get a "Memory cannot
be referenced at "Address"" error.  Is this a problem with my memory or a
problem with the pointer in the application?  Ive run memory tests and
nothing ever comes back with a problem.

I have seen advice on what to do on seeing a "no 80 conductor cable
installed" error message.   However, (trying to get it right in the first
place and avoid the error) I haven't seen anything definitive on identifying
when an 80 conductor cable is required.  A coloured socket on ...

I inserted my new SANDISK Mini-Cruzer USB plug-in drive and it   would
not work. The instructions for the unit said that it does not need any
XP drivers!  Somehow, and I can't recall exactly how I did it, I
deleted all files on the Cruzer which appeared to be only security