Explaination of the RTS/CTS problem.
Transmit hardware flow control does not appear to work when using the
SetCommState call with a created file.  The DCB has been tried in just about
every combination, but none works to automatically stop Tx after a call to

Using MSFT Wizard to backup my 'C' hard drive ...
What diff would it be if I backed up to mybackup-folder on 'C' drive or a
slave drive?
My 'C' drive has Gigomonguss huge free space

MY DVD CD Rom was working fine.  All of a sudden the computer does not
recognize the drive.  Here is the message I get from the device manager:
"Windows successfully loaded the device driver for this hardware but cannot
find the hardware device. (Code 41)

I am running XP home edition.  This afternoon my computer started in
continuous rebooting mode.  The computer has a wireless card.   I was
checking the strength of signal I was getting from other wireless networks in
the neighborhood, (as my own network’s wireless signal was of ...

  I recently aquired a another PC from some friends. It is an Emachines
T1742 and I don't believe it is very old. I haven't had the chance to hook it
up to my monitor to check it out, but I believe it was not used much. It is
slightly better than my current PC. It has a 1.7 GHz ...

I bought a Philips 170S TFT monitor and I cannot configure it to look right.
Red bleeds into the fonts when they are bold and the white letters on all XP
windows and the photos online look screwy. Everything else looks fine. I
have used FPAdjust that came with the monitor, E-Color ...

Replaced a parallel printer with a Lexmark USB. Using the install CD, plugged
in the USB at the proper point, got "Data Error (Cyclic Redundancy Check)".
Took back the Lexmark, got an HP PS7450. Using the CD, plugged in the USB at
the proper point, got the found new hardware ...

I have a TG Dreamboook N7 Series..
Before upgrading to XP Pro I could play sound files, CDs and DVDs,
excellent graphics etc  :) . Now none of them works :( . I have tried
trouble shooter but it tells me there is no sound card, and instead of

I have a Dell Dimension 4300 PC, with something called "integrated audio,"
as opposed to a real sound card. I have this "integrated audio" channeled to
my home stereo via my computer's line out jack, and the sound seems pretty
good. Someone told me, however, that adding a new ...

I am trying to change virus protection. I uninstalled zone alarm in the
control panel, but it is still showing a conflict with my new program
(mcafee). Is there something I'm missing in the uninstall or just something
else i have to do?

Hi - I have laptop with DVD burner which I haven't used for a while with DVDs
- all used to work fine. Now however, it burns CDs no problem and plays DVDs
and CDs no problem, but when I try to burn files onto a DVD+RW or DVD-R it
says that there is not a disc in the slot. ...

 I have two computers #1 runs win xp pro sp2 with all upgrades #2 runes the
same. I bought a D-link router and have both computers on the internet I
also networked them together and enabled print sharing and file sharing. The
problem is when I turn off and restart either of the ...

I have a problem with my usb ports. Either works fine with my printer. But
neither works with my infrared, mpio fy200 and webcam. My printer goes
offline when I try to plug anyone of them. What will I do?
Yob

My DVD burner was able at one time burn CD's by placing a blank disk into the
drive
and then be directed to an empty drive that I would drop in data and then
burn a CD. I would burn multiple sessions. Now I can not do the above. I have

I can't get either of my 56k PCI modems to fully connect to my ISP on the
81955x Pro m/board. They're fine elsewhere.
When I dial it's ok, then it takes forever to handshake and emits a squeal
for about 30 seconds, then after it's verified username and password (which