Hello, and thanks in advance.
Somewhere along the way, Windows XP stopped recognizing blank CDs and won't
let me burn files onto CD-R or CD-RW using Explorer. I can burn audio CDs
just fine through Windows Media Player and downloaded books through Audible,

I have a CD-Rom and CD-R Burner on my Windows XP Pro (SP2) machine. The CD
burner will burn data to a 70 min/800 MB CD (and that CD can be read with no
problems on other computers), but neither the CD-Rom nor the CD burner will
read any 80 min/700 MB CD, even the ones it burned ...

After hardware upgrades, my custom XP Professional audio workstation will not
allow me to re-install my Digigram VX-442 audio card driver or on-board audio.
Error message is:
Cannot install this hardware.  The data is invalid.

After successfully installing a bluetooth headset (logitech mobile pro) it is
not featured in the audio devices given by the control pannel. I need to
implement the headset for VOIP (Skype) and Skype does not register the
headset. How do I make it in there? My system is Windows ...

I have a devise called The Amazing Box.  It is for sewing machine embroidery.  It is a plug and play and then I can download sewing designs from the computer to the box and save them on a card that fits into my sewing machine and then put the card into my sewing machine and sew ...

my pc comes with 4 1.1 usb ports. i recently installed a pci card that gives
me 4 extra 2.0 usb ports. to avoid the hassle of having to crane my body
behind my pc every time i want to hook up a device, i also bought a 4 port
usb hub (2.0) that i connect to one of the 2.0 port so ...

recently we had power failure and when I turned my computer back on, my bios
came up.I tryed to exit out but some how disconnected or turned off my second
hard drive and can not get it to go in the active state again, how do I check
for the missing letter E that the drive is on ...

Hello, I have a Compaq Presario 5000 with an Intel 82815 motherboard.
It has an AGP port on it, but when I put my Geforce 2mx400 in there,
it doesn’t recognize anything.  (The reason I’m doing this is
because I can’t stand the weak integrated graphics chipset anymore.)

I upgraded my processor and mother board. I had two hard
drives in my old system. I reformatted the c: drive loaded
winxp no problems, however when I installed the second
hard drive from my old computer to the new one xp won't

How do I go about providing surge protection for a Cisco 1720 router?
I have looked all over Cisco's web page and find nothing helpful.
Thanks for any help you might give me.
Chris Smith.

I'm having trouble installing drivers for a firewire controller card in
my new machine.
The card is recycled from my previous machine. In that machine, it
showed up as the "VIA OHCI compliant IEEE 1394 controller" from

I received a reply from Sandisk (after 2 weeks of try this and that) with a
solution - at least for me.
Here is the registry edit:
HKEY_LOCAL_MACHINE\System\CurrentContolSet\Enum\USB\VID_0781&PID_7101 and/or

Ran Network Diagnostics from tools.
Network Adaptors-failed
listed:
VIA RhineII Fast Ethernet Adapter-failed

I have a set of USB ports on the front of my machine and another set on
the back. My ports on the back work fine and if i plug in my 2 pen
drives in it works OK. But if I plug them in the front I get the error
This device cannot start. (Code 10)

I currently have a basic cd drive installed, I installed a 2nd dvd rw drive
as the slave, when I go under device manager it is showing my original drive
but is not seeing my dvd drive