Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsWindows VistaWindows XPWindows MeWindows 98Windows 95Virtual PCInternet ExplorerOutlook ExpressWindows MediaSecurity
Related Topics
MS Server ProductsMS OfficePC HardwareMore Topics ...

Windows Forum / Windows XP / Hardware / October 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
CPU usage (2nd attempt)27 Oct 2005 15:19 GMT7
I posted this before, but received no response, so I am trying again.
Hi,
Having a problem where my CPU maxes out quit frequently when it never used
to.  It does it especially with games (games that have requirements of like
TransFlash Card Slot27 Oct 2005 14:58 GMT1
On the DELL Inspirioin 8200 where is the TransFlash Card Slot if there is any?
Problems With Setting monitor colour and depth after formatting27 Oct 2005 13:44 GMT3
I have just formatted my mums computer and i cannot set the right colour
depth on the screen.
I can only choose 1 depth and only 8bit coulor depth
Or i can set a really big size and the right coulor depth.Confusing right.
Laptop  inspiron 5100 powers down27 Oct 2005 13:36 GMT1
My Inspiron 5100 powers down at will.  Varying times with or with power
supply connected.
Any suggestions
Bud
Startup Issue27 Oct 2005 12:42 GMT2
It's almost regular that the first time each day I click the power on for my
system, I can hear the fans turn on, but it doesn't boot up.  The monitor
stays in suspend, and you dont have the drives powering up at all.  I have to
click reset a couple times or even click and hold ...
10gbs missing?27 Oct 2005 11:28 GMT5
i was wondering, i just got a brand new hard drive that is anothe
160gb however i only can have upto 149 gbs
is there a reason its not available? this is a secondary hd =
Help w/Third SATA HD (non-RAID)  WinXP MCE won't recognize.  AMI BIOS shows third HD27 Oct 2005 11:18 GMT2
I have a Sony VGC-RA820G
have DL'd all the latest Windows updates
DL'd all the Sony updates
The unit came with a Western Digital 200 GB HD - SATA
Need help with Upgrade. Windows won't start.27 Oct 2005 08:50 GMT3
Need help with Upgrade.  Windows won't start.
I am upgrading my Dell Dimension XPS 450, Win XP, with a new Mobo (ECS
661FX-M7) and processor (Intel P4, 2.67 G Hz)
POST is fine.  Mem check is fine.  Screen goes to the point showing
Windows XP doesn't recognize the 250GB HD27 Oct 2005 04:32 GMT7
I just got a new computer and it's running windows xp pro.
It has a Pentium D, ASUS P5LD2 mobo, 2GB PC3200 RAM and a 250 GB HD...
Unfortunately the OS only sees 160GB...
Is there any way I can force windows to see the other half od the HD?
cd/ dvd rom not working27 Oct 2005 02:42 GMT2
all of a sudden my cd drives didnt work. so i went to my computer- view
system information- hardware and there were two yellow exclamation points
next to them. and when i click it it said "error code 41". so then it said i
should install it and then reinstall it with the cd. but ...
RAID-1 doesn't boot Windows XP26 Oct 2005 23:16 GMT2
I have setup a system with a Silicon Image IDE RAID controller. I
installed it without connecting the hard-drives and Windows picked it
up fine and installed the drivers from the CD.
Afterwards, I connected two drivers in a primary and master setup to
XP Media Center and Digital Cable26 Oct 2005 22:31 GMT2
I'm considering getting a media center PC with Windows XP Media Center
edition and have been researching the benefits and whatnot. I have one major
question I need answered before I make a decision. I have digital cable
through my local cable provider (Brighthouse). With my ...
disk cleanup26 Oct 2005 20:58 GMT5
HELP!  everytime i try to run disk cleanup i get an error message that says
Disk space cleanup manager has encountered a problem and has to close.    i
have no idea what to do.  any suggestions would be greatly appreciated.  
Access is Denied - Hardware Install26 Oct 2005 20:09 GMT3
I get the following message:
An error occurred during installation of the device
Access is denied
while attempting to install an HP Photosmart 7760 printer.
Firewire (IEEE 1394) port problem26 Oct 2005 16:35 GMT4
I have a Toshiba Satellite Pro M30 with windows XP SP2.
When I tried to connect a video camera trough the firewire port, nothing
happened.
Checking the device manager I saw that the "Texas Instruments OHCI Compliant
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.