| Thread | Last Post | Replies |
|
| Windows XP not recognizing Epsonscanner in Device Manager/Cntl Pan | 21 Nov 2005 21:49 GMT | 6 |
I have had this recurring problem, scanner is not recognized in my Windows XP Control Panel under Scanners and Cameras and also under Device Manager, Hardware. When I try to use my scanner, it shows that it is not properly connected and try again. In other words, windows does ...
|
| Booting Older PC from USB Flashdrive | 21 Nov 2005 21:21 GMT | 6 |
My PC does not support booting from a USB drive and their is no BIOS update available for the motherboard to enable it. Before the days of CD booting being supported by the BIOS if was possible to use a floppy disc to boot the CD ROM. I would like to do the same to boot from a ...
|
| Mouse scroll wheel only works in half of applications | 21 Nov 2005 18:30 GMT | 2 |
Does anyone know much about mouse scroll wheels? I've just bought a Targus PAUM007 cordless optical mouse, with 5 butttons and a scroll wheel. If I don't install a driver, or use the logitech driver from my old mouse, the scroll wheel works fine but I can't program or use the 4th ...
|
| DVD drive won't read cd's....again! | 21 Nov 2005 16:58 GMT | 4 |
My DVD drive, an NEC ND 6500A, has stopped reading any form of cd, will still read DVD's though. It's happened before and the only way I could fix it was to restore my computer back to when I knew it was working. It happened again and when I tried to do a system restore my ...
|
| New Microsoft Laser Mouse 6000 GUI freezes | 21 Nov 2005 15:05 GMT | 3 |
Just got a new Laser Mouse 6000 and I love it, but occasionally the cursor disappears but I can still navigate by waiting to see which buttons on the screen get highlighted. Only solution so far has been to reboot. Then all is well.
|
| Windows XP Won't Install Monitor | 21 Nov 2005 15:02 GMT | 3 |
Had a major crash and re-set back to factory settings. XP has the moonitor listed as default (with no information i.e. LCD1511M as it normally would). Th device manager doesn't have a monitor listed.
|
| Graphics card standby | 21 Nov 2005 14:58 GMT | 5 |
I have a AMD 3000+ 939-pin processor with asus a8n-e motherboard and geforce 6200 graphics card with turbocache.I usually download lots of software from internet and my pc will be running day & night. I like to put my system in maximum power save mode such way it consumes
|
| Computer won't boot | 21 Nov 2005 14:32 GMT | 2 |
The computer will boot for a short time (varies from minutes to almost an hour) then it just freezes.Sometimes I have to pull the power cord to get it to reboot.
|
| Ethernet cable question | 21 Nov 2005 14:20 GMT | 3 |
I hope this is the correct forum for my question -- I would be grateful if someone please advise me as to whether a standard ethernet cable can plug into a Xircom CreditCard Ethernet Adaptor Dongle(p/n 170-0380-003E) for Broadband use?
|
| Ethernet adaptor question | 21 Nov 2005 14:16 GMT | 1 |
I hope this is the correct forum for my question -- I would be grateful if someone please advise me as to whether a standard ethernet cable can plug into a Xircom CreditCard Ethernet Adaptor Dongle(p/n 170-0380-003E) for Broadband use?
|
| Help with Mirrored Volumes | 21 Nov 2005 13:59 GMT | 1 |
I have a system with two 40GB HD Labeled C and D I have an External 80 GB Hard Drive labeled F I have a 120 GB External Labled H. I want to mirror D and F on to H.
|
| VGA Out From PC to VGA In to Laptop | 21 Nov 2005 13:43 GMT | 13 |
I service a client that has four systems without a monitor. When I have to do anything with them I just use the Remote Desktop Client. However if there's an OS level problem then that's not an option. The situation doesn't conveniently allow for a conventional KVM solution. ...
|
| Distorted Display and computer freeze | 21 Nov 2005 13:43 GMT | 2 |
After being online for an hour, my display gets fuzzy and distorted, I hear a high pitched quiet noise and my computer freezes up. After I manually switch the computer off then on again, it is fine for another hour. Any ideas on what the problem is?
|
| Floppy Drive | 21 Nov 2005 13:21 GMT | 7 |
I am having problems with a Floppy Drive on my PC. On inserting a disk (I know disk is OK) the LED on the drive does not come on, when I try to open a file on the disk the drive LED comes on and stays on, windows displays the hour glass icon but the windows cannot access the ...
|
| USB Port questions... | 21 Nov 2005 08:02 GMT | 5 |
Hi, through Windows XP's device manager, I see I have four 'USB Root Hub' devices. These correspond to the four usb ports on my laptop, 3 on the right of the machine and one on the left. When I right click on the devices, and choose 'Properties', I can click
|