I have a big problem.
After running defragmentation on a WinXP NTFS harddisk
I had to recognize that the logical drive was lost. In
partition table I only see sensless beginning and stop

Ok so I'd just thought to try out the new mousey... side scroll and all ...
You do have to use the USB port to get the side scroll to work... WOW.
ps2 KMV does cause problems..
Now for the other sh.... I do a lot of programming in VB6 still. Now with

I have a Maxtor 120GB Hard drive that cannot be detected by my computer. This
is how it all happened: I put on my computer and it was running fine, but
after about 20 minutes I began to hear an unusual sound, some windows closing
on their own. This prompted me to shut down, which ...

Since I wiped my drive and reloaded Windows and the rest of my software, I
have not been able to read from my DVD drive.  My CD drive is okay, though.
I used the troubleshooting facility, but it did not solve the problem.
Any help will be appreciated.

I have an external hard drive and I wish to combine its' volume with my
computers hard drive. Can someone let me know what the procedure for doing
this? I would appreciate any help.
Thanks, Mike

Please help me, I want resize and merge HDD partitioning without data loss.
I formatted with NTFS HDD during windows XP installation, into 9 partitions.
OP: Windows XP sp2,
boot partition: C, 32 GB, 60% free

ich habe grade windows xp 64 gekauft.Leider hat XP64 kein treiber für
hauppauge wintv pci, auch kein für Level-One WNC-0301 USB2.0 (wlan usb), und
auch kein für mein Soundkarte CMI8738.
hat jmdm (oder weisst jmdm) wo ich die treiber finden kann?? ich habe das

weisst jmdm ob Condizion Zero lauft unter Windows XP 64??
Ich habe in internet gesucht, leider nicht gefunden.
danke.
mfg,

My computer (a emachine T1860, running WXP) was running "Winfixer"
repeatedly.  I don't know what it is,
except I sure didn't put it there and wanted to get rid of it.
To do that I ran an antivirus program call "Stinger".

Recently, I replaced a Western Digital 160GB drive on one PC with a Hitachi
250GB one. This is the master on the primary IDE channel on a Promise TX2
Ultra-133 PCI Controller. The drive was partitioned (NTFS) and formatted in
Disk Management and works perfectly in Windows (XP Pro).

I have this Dynex web cam and it says its for windows XP right on the box.  I
downloaded the software (CD) but when I plyg the cam into the USB port, i get
this message "cannot install the device.  CIP single chip.  The class
installer wont allow this devise to upgrade or install ...

Something has gone wrong with a friends Windows XP installation. Problems
starting playing up with Norton Internet Security 2002 so frustrated we
removed it to move to AVG.
Norton removal was messy. Can't remember exactly but I had to re-enable some

My boss has a Dell Dimension 8100 and has about 8-10 USB devices plugged into
it.  Periodically it locks up.  What is XP's limit has to how many USB
devices it can support?  The computer has about 6 USB ports on the back and
two in the front.

   I have a Garmin GPS that I connect to my IBM ThinkPad running Windows
XP.  Because the ThinkPad has no serial ports, I connect the GPS through a
USB-to-Serial adapter.
   Whenever I connect the GPS, it is recognized as a "Serial Ballpoint

Ok,
Here's the story. I have 2 different OS's on 2 different drives. The main is
Win 2k Pro and the secondary is Win XP Pro. I just have so much on the Win 2k
drive I kind of want to ease into an XP state of mind. Here's the issue. On