Would anyone know how to use a SATA hard drive on a Ultra100 PATA system?
I'm considering a complete system upgrade in 4-6 months that will be SATA
I/II, however I have one (1) hard drive that I need to replace soon.  No OS
on this drive, I store my personal files on this drive.

I have the Asus P4B266. It has the P-IV 1.8ghz, but I want to put the
Pentium IV 3.7ghz in it. I know Asus has a bios update to accommodate
processors over 2.9ghz. I really want to upgrade to the Pentium® 4 Processor
Extreme Edition supporting Hyper-Threading Technology, 3.7ghz, ...

Asus has a bios update for the 3.0ghz cpu. I plan to upgrade from a 1.8ghz
to a 3.0ghz. Should I update the bios before putting in the new chip or
after?
I would think updating the bios immediately before the chip is replaced

I have a question I can't find an answer to.
I have 4 wired Microsoft Intellimouse Optical wheel mice.  They are
installed on computers with Windows 98, Windows 2000 Pro and recently
Windows XP Pro operating systems.

I recently changed out my hard drive and installed Windows XP.  I was able to
install other programs with cd's (Antivirus, antispy, office, etc.).  Now I
am not able to run any cd's (music, files, games).  I did as much as I could
to fix it.  Uninstall/reinstall drive, ...

Hi, I have downloaded the Windows XP Upgrade Advisor program
and got it up and running with the latest updates available online.
It freezes up while running when It gets to this stage:
Processing system files ...

I just bought a new Microsoft Wireless IntelliMouse Explorer 2.0 and was
wondering if there is a way to increase the movement of the cursor in
relation to when you move the mouse.  So that a smaller movement of the
mouse will move the cursor more.

When I install additional memory initial boot up recognises it, but get
error message when booting up windows.
"Unable to start window due to lost or corrupted ntoskrnl.exe file.
If I remove new memory boots up OK. This is the second set of memory I have

I know I can have 2 hard drives on the same cable, but can one of them be
ATA150 when the other one is ATA100? Also, will the ATA150 suffer
performance if it is on the same cable as an ATA100?
Thank you!

I have a usb hard drive that was working fine until a power outage.  My
battery backup kicked in fine for just about everything except that a notice
came up stating that I should use "Stopping a USB device" warning.  When
everything came back to normal that particular hard drive ...

hey guys, got a WD 20GB hdd with os and data on it, its getting full now. So
i bought a Seagate 40GB to replace it, i have imaged the 20GB to the 40GB
with Acronis Drive Image, it seems to have copied ok, but when i try to boot
from the 40GB, the screen reads, that the " NTDRL is ...

I have seen this product:
http://www.cwol.com/serial-ata/ide-to-sata-converter.htm
If I get this, does it mean that it will support drives bigger than 137 gb
even if my motheboard does not have LBA 48????

When I start in "safe mode" it runs ok!
In safe mode I have tried to adjust the resolution to the lowest, but when
rebooted in normal boot the screeen says "Out of range" again..
(The monitor isn't listed in hardware list along with other hardware)

I recently purchased a wireless mouse (Logitech Wireless).
I leave my machine on 24/7 but it goes on standby after 20 minutes of
non-usage (or I place it on stamdby manually)  Everything works great but I
seem to be changeing the mouse batteries every 7-8 days.  I use rechargeable ...

I am running WinXp Home Edition that is uptodate with Service Packs and
Patches.
I have Creative Live Value Card, which had disappeared from the Device
Manager. I was attempting re-install the software for it. When the