| Thread | Last Post | Replies |
|
| Adjusting & Saving Display Settings? | 30 Jan 2006 18:13 GMT | 3 |
I have occasion when I adjust the gamma setting (red only) to the maximum and lower the brightness somewhat on my laptop PC- call it low-light/night-vision mode. When I'm through using the PC in this configuration I just go back to color management and select the defaults,
|
| New PC Build | 30 Jan 2006 16:47 GMT | 3 |
I am in the process of building a Presler 930 series and was wondering if anyone out there has built a new system based based on any of these 900 series. I am looking to get tips or links that could help aid me.
|
| My speakers | 30 Jan 2006 16:29 GMT | 11 |
Hi Ive just bought New Labtec speakers After old ones had eventually broke. Ive connected fine but they wont play, when I look Into sounds and devices on the device manager its says no audio device connected Please Help!
|
| Wireless Keyboard Problem | 30 Jan 2006 16:27 GMT | 1 |
My Belkin wireless keyboard has recently started behaving oddly. Several of the keys, when pressed, don't just type the character but also the one above it i.e. g gives gt
|
| Dell Resource CD numbers? | 30 Jan 2006 15:14 GMT | 1 |
I have a resource cd for an Optiplex 170L desktop with all the drivers & utilities on it. I was going to take it out of its paper sleeve and put it in a spare hard plastic cd jewel case for safekeeping. I noticed there
|
| BlueSoleil program will not install???? | 30 Jan 2006 08:40 GMT | 1 |
I installed the BlueSoleil program to use a USB dongle to interface with my Motorola V551 phone. I found an update that required removal of the program and a re-install of the new one. I did this and now every time I try to install the new program or the old one, it asks if I ...
|
| Hardware Installation Problem | 29 Jan 2006 21:09 GMT | 4 |
I'm trying to install a Netgear wireless WG111V2 USB key on my Windows XP SP2 computer and when I plug the key, I'm requested to install the driver so I insert the Netgear Driver CD in my CD Drive and each time the installation terminates with the followuing message :
|
| I/O Device Error | 29 Jan 2006 18:30 GMT | 1 |
I recently got a new iPod and when I went to put the install CD in nothing happened. So I went to the start menu, selected RUN clicked on browse, looked into the F Drive and nothing was there. When I run the Set Up, a message comes up saying: F:/Drive is not available. Request
|
| USB port not reading devices | 29 Jan 2006 18:28 GMT | 1 |
Hello- I have a HP digital camera that has worked fine when connecting to my comp until today. Now I get a message that reads, "One of the USB devices attached to this computer has malfunctioned and Windows does not recognise it." I then noticed that the message remained flashing ...
|
| Volume level changing as music plays | 29 Jan 2006 18:10 GMT | 1 |
I've experienced this with Windows Media Player and with Itunes. The volume level of a currently playing MP3 will drop to about half volume for anywhere from half a second to 10 seconds. It's like some gremlin is raising and lowering the volume on a whim.
|
| Use of Thumb Drive | 29 Jan 2006 15:49 GMT | 3 |
Have new PC with XP SP2. Everything works good including USB printer, input devices, except Thumb Drive. When I insert Thumb Drive in any of the six USB ports, my PC locks requiring restart to function. Same thumb drive works in my Laptop and other PCs. Any suggestions?
|
| Password | 29 Jan 2006 14:28 GMT | 1 |
My PC (OS Win.XPPro) is still warning me on bootup that my Password will expire in one day and do I want to change it, although I firstly changed the Passwordonce and I was still having this warning, so I removed the Passwordaltogether, but I still get the same notice!
|
| No firewire physical ports | 29 Jan 2006 12:48 GMT | 2 |
Getting a motherboard with onboard firewire. Only has pinouts at two locations on the motherboard for firewire. One location is the standard 5X2 block. This gives me one physical port. The other is a 8X2 block, which will provide two physical ports.
|
| cd & dvd drives | 29 Jan 2006 02:16 GMT | 6 |
my cd and dvd drives have disappeared from 'my computer' In the device manager, I get the following message: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
|
| Razr phone connection to pc | 29 Jan 2006 01:48 GMT | 1 |
alright, im totally stumped on this, my friend let me barrow the usb cables from his motorola phone. Now when i first installed the cables the " detected new hardware " wizard came up but never found the software for and the process was unfinished. When i retried it again the ...
|