Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsWindows VistaWindows XPWindows MeWindows 98Windows 95Virtual PCInternet ExplorerOutlook ExpressWindows MediaSecurity
Related Topics
MS Server ProductsMS OfficePC HardwareMore Topics ...

Windows Forum / Windows XP / Hardware / May 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
ATI Technologies 100-714127 HD-TV All-in-Wonder02 May 2006 21:14 GMT5
Does  anyone have any knowledge about this card?
I found some info that says you can use a Pentium 2,3 or 4, but no
information as to the CPU speed needed.
I also found somthing that said you need another graphics card for
No keyboad/mouse @ log-in screen02 May 2006 19:29 GMT1
IBM ThinkCentre S50
PS/2 Keyboard USB Mouse
Windows XP
After a year of perfect operation, this machine ceased to respond to
Where to start?02 May 2006 15:57 GMT10
Friend's bring me his PC to look at over the weekend.
Says it's in a reboot loop, gets as far as loading Windows then shuts down
with no messages then reboots to the same point.  Same trying in Safe Mode
so can't get as far as checking Event Viewer.
USB Hardware Devices DO NOT WORK02 May 2006 15:04 GMT1
When I try to connect my Dig. Camera or MP3 player via USB nothing happens.
It worked well on the computer I'm using when I used Win 98SE, but then I
installed win XP Home and neither of these devices work on this computer
anymore. They work fine on the laptop. At the moment I'm ...
RAM Problem?02 May 2006 11:31 GMT8
I booted up today and instead of 1 gig of RAM, I had 512 MB. I opened
the case and pushed down on the RAM, rebooted, and I have a gig again.
Anyone know what might be going on?
Thanks,
USB Camera and increasing drive letters02 May 2006 11:12 GMT17
I recently purchased a camera that connects to a cradle for picture
transfer and charging.  The cradle is plugged in all the time, but
every time I put the camera into the cradle and turn it on, WinXP
assigns a new, sequential drive letter to it.  For example, when I
Installing XP Prof02 May 2006 10:35 GMT2
HELPPPPPPPPP!!!
I'm trying to install win xp prof on a 40Gb Parallel ATA Seagate 7200rpm
HDD. After loading installation files, i got a blue screen with the message
below:
How to know if the NIC card has dead02 May 2006 08:58 GMT13
It was working fine since last time I used the pc, now I'm able to ping it
from another computer, but if I go in network place and try to browse the
network an alert says me that I've unsufficient authorization.
Since I've not changed anything, this let me think to some hardware ...
SataII HDD on SATA MOBO02 May 2006 08:31 GMT3
Is there any problem installing a SATA II HDD on a motherboard with just
SATA I connection?
Larry
hot keys02 May 2006 03:31 GMT4
I have a Tablet PC and a MS Wireless Keyboard and Mouse connected through a
7-port USB hub.  The keyboard and mouse function except for the Hot Keys.  
Any advice?
Exchange 2003/Raid Drives02 May 2006 02:49 GMT4
Hello, forgive me if this is not in the correct category, but my problem
spans a number of areas.
I am running a Dell Dimension 2400 machine.  It is a celeron 2.6g with 1GB
ram.  I have also added three extra internal IDE HDDs.  As my motherboard did
What is exactly the HCL?02 May 2006 01:56 GMT2
I am looking for a list that would enable me to find out if such or such a
device could be installed on WINXP or WIN2K without having to provide a
Driver Floppy or CD.
In other words, a list that would tell me if WINXP or WIN2K System-supplied
Screen saver not woking after install Microsoft mouse.02 May 2006 01:54 GMT1
I have same problem after installed MS wireless mouse,  I try many
different way, I finally found what happened. If you have any DVD
player software installed in your system that is the reason for screen
saver not activate, Because DVD program are run in PC back ground,
Problems with DVD-RW drive01 May 2006 23:53 GMT3
As ASUS website recommended I upgraded the firmware on my ASUS 1608P DVD
drive to v 1.57.  Now just hangs for several minutes when I insert a cd/dvd
and led just flashes on and off and icon does not change and autorun the
disc.    When I try to take the disc out it gets mad at me ...
Intellimouse Explorer 3.0 problem01 May 2006 22:02 GMT3
OK, so I'm trying to install the correct mouse software and drivers for
this mouse.  Basically the problem is, before I moved my computer desk
downstairs, I could use the Mouse control panel to setup the Middle
button on this device as Double click.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 April, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.